User manual WHIRLPOOL OBI 118 S PROGRAM CHART

[. . . ] - Ideally, the shelf should be on the second runner level when using the static function. Last STATIC FUNCTION + FAN Use this function when cooking on two different levels. - Oven preheating is not necessary (except for pizzas and focaccia). - Switch the position of the dishes in the oven 10 minutes before the end of cooking time. - Remove the cooked dish and, if necessary, continue cooking the other one for as long as required. First GRILL FUNCTION Accessories: • Grid • Baking tray • Catalytic panels • Grill pan set Use the grill function to cook small pieces of meat (steaks, sausages) and for making toasts. [. . . ] - Remove the cooked dish and, if necessary, continue cooking the other one for as long as required. BOTTOM HEATING FUNCTION Use: - To finish baking fruitcakes or cheesecakes. Use the lower heating function for the last 10 or 15 minutes of cooking time. 5019 610 54303 MECHANICAL ANALOG TIMER This electromechanical programmer allows: 1) Viewing the time of the day. To adjust the time, press the button (B) and turn it anti-clockwise. 2) Programming the cooking start time max. if you wish the cooking process to start at 8. 00 p. m. because the oven would switch on at 8. 00 a. m. ). 3) Programming the duration of the cooking process from min. 180 minutes. d) PROGRAMMED COOKING WITH COOKING DURATION 1) Turn the button (B) anti-clockwise (without pressing) until the required cooking duration is displayed in the window (C) (5 - 180 min. ). 2) Press the button (A) and turn it anti-clockwise until the triangle (D) points to the time shown on the clock (hour hand). The button clicks when turned to the proper position. 3) Turn the selector knob to the required symbol. 4) Turn the thermostat knob clockwise to the required temperature. The red thermostat indicator light switches on. 5) At the end of the set cooking time an acoustic signal will sound and the oven will switch off automatically. To exclude the acoustic signal, turn the button (B) anti-clockwise (without pressing) until the symbol is displayed in the window. 6) At the end of the set cooking time, cooking may be prolonged by following the instructions given above, or by using the manual cooking procedure. SWITCHING ON THE OVEN a) MANUAL COOKING 1) Turn the button (B) anti-clockwise (without pressing), until the symbol is displayed in the window. 2) Press the button (A) and turn it anti-clockwise until the triangle (D) points to the time shown on the clock (hour hand). The button clicks when turned to the proper position. [. . . ] 2) Press the button (A) and turn it anti-clockwise until the triangle (D) points to the time at which cooking is to start (e. g. 3) Turn the selector knob to the required symbol. 4) Turn the thermostat knob clockwise to the required temperature. 5) At the end of the set cooking time an acoustic signal will sound and the oven will switch off automatically. [. . . ]