User manual WHIRLPOOL OBU 207 W INSTRUCTION FOR USE

[. . . ] CONTENTS INSTALLATION ELECTRICAL CONNECTION BEFORE USING THE APPLIANCES PROTECTING THE ENVIRONMENT PRECAUTIONS AND GENERAL RECOMMENDATIONS ENERGY SAVING TIPS OVEN ACCESSORIES COOKTOP ACCESSORIES OVEN FUNCTIONS COOKTOP FUNCTIONS CLEANING THE OVEN AND ITS ACCESSORIES CARE AND MAINTENANCE OF CONVENTIONAL ELECTRIC COOKTOPS CARE AND MAINTENANCE OF THE GLASS-CERAMIC COOKTOP TROUBLESHOOTING GUIDE AFTER-SALES SERVICE DECLARATION OF CONFORMITY CE PAGE GB 16 18 19 19 PAGE PAGE PAGE PAGE 19 20 21 21 22 23 PAGE PAGE PAGE PAGE PAGE PAGE 23 PAGE 25 PAGE 25 25 26 26 15 PAGE PAGE PAGE INSTALLATION Technical information for the installer OVEN • After removing the oven from its packaging, before making the connections place it on the polystyrene foam base to protect it from damage. • Do not attempt to lift the oven by the handle. Lift at the sides as shown in the figure (see arrow). • Check that the appliance has not been damaged in transit. [. . . ] Baking tray 2 For cooking biscuits, meringues and pizzas. Grid 3 The grid can be used to grill food or as a support for baking trays, cake tins and other cooking receptacles. It can be placed in two different ways ( or ) and on any of the runners in the oven. Catalytic panels 4 The catalytic panels have a microporous coating that absorbs fat spatters. We recommend an automatic cleaning cycle after cooking particularly fatty food. To clean the oven heat it to 200°C when empty and leave it switched on for about an hour. At the end of the cycle, when the oven is cool, use a moist sponge to remove food residues. Do not use detergent or cleaners - risk of damaging the catalytic enamel coating. Spit 5 Use the spit as indicated in the relevant chapter in the Product Description Sheet supplied separately. Pan Set Kit 6 The set comprises a grid 6a , a drip tray 6b and one or two tongs 6c . This accessory must be set on the grid 3 and used with the Grill function. . 2 3 4 5 6 6a 6b 6c COOKTOP ACCESSORIES Child guard accessory AMH 122 This accessory can be obtained from the After Sales Service under Part N° 4819 310 18436 or from your dealer under Ref. 017124. 21 OVEN FUNCTIONS The functions actually available depend on the model (see the Product Description Sheet supplied separately). temperature control; the temperature can be set in the range of 50°C to 250°C. • It is not necessary to preheat the oven. • Switch the position of the dishes inside the oven during cooking time. • If the dishes in the oven have different cooking times, remove completed dishes and leave remaining foods until cooked. STATIC FUNCTION This function is used to cook food on the same runner level. The function allows temperature control; the temperature can be set in the range of 50°C to 250°C. The function provides 3 cooking programs (P1, P2, P3 is available depending on model). The temperature levels in each program are preset and can be selected by the user. The temperature values that can be selected in each program are limited by the programmer, in order to obtain good cooking results. Each program corresponds to a recipe for the preparation of the dish you want (consult the Bread/Pizzas cookbook). • The default setting of this function is P1. FAN FUNCTION This function is especially useful for simultaneously cooking different foods at more than one shelf level (for example: fish, vegetables, pasta). [. . . ] This will prevent the build-up of dirt and make cleaning easier. • Use a clean cloth, absorbent kitchen wipes and washing up liquid or a specific glass-ceramic hob cleaner. • Remove baked-on dirt with the supplied scraper tool and specific cleaning products. • Food spills should be cleaned off before they bake onto the glass-ceramic surface. [. . . ]