User manual WHIRLPOOL OV B11 B INSTALLATION

[. . . ] Indicates a hazardous situation which, if not avoided, could cause serious injury. All safety warnings give specific details of the potential risk present and indicate how to reduce risk of injury, damage and electric shock resulting from improper use of the appliance. Carefully observe the following instructions: -- The appliance must be disconnected from the power supply before carrying out any installation work. -- Electrical installation and maintenance must be carried out by a qualified technician, in compliance with the manufacturer’s instructions and local safety regulations. [. . . ] € Clean the surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. oven interior IMPORTANT: do not use abrasive i sponges or metallic scrapers or scourers. Over time, these can ruin enamelled surfaces and the oven door glass. € After every use, allow the oven to cool then clean it preferably while it is still warm in order to remove built-up dirt and stains caused by food residues (e. € Use proprietary oven detergents and follow the manufacturer’s instructions to the letter. € Clean the door glass with a suitable liquid detergent. The oven door can be removed to facilitate cleaning (see MAINTENANCE). NOTE: during prolonged cooking of foods with a high water content (e. ) condensation may form on the inside of the door and around the seal. When the oven is cold, dry the inside of the door with a cloth or sponge. NOTE: Only use 25-40W/230V type E-14, T300°C incandescent lamps. Lamps are available from IKEA After Sales Service. Problem The oven does not work: Possible cause No electrical power supply. The oven is not plugged into the mains socket. the selector knob is set to “0”. The selector knob is set to “ The oven door is locked and will not release (Nutid OV9 – Framtid OV9 version) The oven door is locked and will not release (Framtid OV5 – Datid OV7 version) Electrical malfunction due to voltage fluctuations. Solution Verify the presence of mains electrical power Connect the oven to the power supply. Switch the oven off and then on again to see if the fault has been eliminated. electrical malfunction due to voltage fluctuations. For Framtid OV5 -- Set the function selector knob to “0”. -- Set the timer to 5 min and wait for the oven door to be released. [. . . ] € Non-functional and decorative parts which do not affect normal use of the appliance, including any scratches and possible color differences. • Accidental damage caused by foreign objects or substances and cleaning or unblocking of filters , drainage systems or soap drawers. € Damage to the following parts: ceramic glass, accessories, crockery and cutlery baskets, feed and drainage pipes, seals, lamps and lamp covers, screens, knobs, casings and parts of casings. Unless such damages can be proved to have been caused by production faults. [. . . ]