User manual WHIRLPOOL OVN 618 S PROGRAM CHART

[. . . ] It is advisable to place food on the 4th or 5th level. When grilling meat, use the drip-tray to collect the cooking juices. Position it on the 3rd/4th level, adding approx. To roast large joints of meat (legs, roast beef, chickens). [. . . ] appears on the display and a buzzer sounds. 1 2 3 ᕃ ᕄ ᕅ ᕆ ᕇ Display Function selector knob Programming button: (“set”) Confirm button (“ok”) 4 5 The cooking duration can be modified with the “-” or “+” buttons. Return to point 3 of the section “Cooking duration selection”. The time of day reappears on the display. End of cooking time selection Time values modification buttons (“-” “+”) Oven thermostat knob Use this function to preset the end of cooking time. The maximum programmable time is 23 hours and 59 minutes. Proceed as described in points 1 and 2 of the section “Cooking duration selection”. Press the “set” button to set the end of cooking time: the indicator 3. Set the end of cooking time with the “-” or “+” buttons. Press the “ok” button to confirm the end of cooking time. The oven will switch on automatically at the end of cooking time minus the cooking duration: the indicators on the display above the symbols light up in succession. lights up next to the symbol . Oven activation When the oven is connected to the power supply for the first time, or after a power failure, the display indicates “12:00”. Press the “-” or “+” button to set the hour. Press the “set” button and “-” or “+” to set the minutes. Press the “ok” button to confirm. To modify the time: Keep the “ok” button pressed for 3 seconds, until the time flashes on the display. Repeat the steps described above. Special Functions Turn the knob ᕃ to the function : will light up near the symbol . Pizza Function at a constant temperature of 250°C suitable for baking pizzas. Turn the knob ᕇ until the message “P1” appears on the display, followed after 2 seconds by the predefined temperature of 250°C. Press the “ok” button to confirm. The indicator at on the control panel goes off when the temperature of 250°C is reached, a factory-set time of 12 minutes flashes on the display and a buzzer sounds. The preset time can be modified with the “+” “-” buttons. Press the “ok” button to confirm. [. . . ] To modify the previously set temperature, turn the knob ᕇ. To return to the remaining cooking duration, wait 5 seconds. Cooking duration selection NUTID ELECTRONIC TIMER INSTRUCTIONS “Pyrolysis” function 1. Turn the knob ᕃ to the Pyrolysis automatic cleaning function and for 2 seconds the display will show Cln (cleaning); the selector will automatically set a minimum duration of 1:30. To modify the automatic cleaning cycle duration, use the “+” “-” buttons. [. . . ]