User manual WHIRLPOOL PCCI 802160 X INSTRUCTION FOR USE

[. . . ] IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others. All safety warnings are preceded by the danger symbol and the following terms: DANGER WARNING Indicates a hazardous situation which, if not avoided, will cause serious injury. Indicates a hazardous situation which, if not avoided, could cause serious injury. All safety warnings give specific details of the potential risk present and indicate how to reduce risk of injury, damage and electric shock resulting from improper use of the appliance. Carefully observe the following instructions: The appliance must be disconnected from the power supply before carrying out any installation work. [. . . ] ELECTRONIC PROGRAMMER THERMOSTAT LED COOKTOP “ON” INDICATOR LIGHT The multizone function can only be switched on for the double and triple hotplates of the cooktop. (See cooktop functions table). OVEN OPERATION • Turn the selector knob to the required function. • Turn the thermostat knob clockwise to the required temperature. The thermostat led lights up, switching off again when the oven reaches the selected temperature. At the end of cooking, turn the knobs to “0”. COOKTOP OPERATION The oven control panel features 4 adjustable knobs for cooktop operation. The cooktop control knobs are marked with a numerical scale corresponding to different power settings, and a series of function symbols. • Turn the control knob of the relevant hotplate clockwise to the desired power setting (see the instructions supplied with the cooktop). GB20 USING THE ELECTRONIC PROGRAMMER Description of Functions 1. Function selector knob Programming button: (“set”) Confirmation button (“ok”) Buttons for changing time (“-” and “+”) Temperature selection knob 1 2 3 4 5 Display detail A B A. E. Timer Key-lock Temperature indicator Cooking Time End of cooking time C D E Starting the oven When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates “ ”. Selecting and changing the clock time 1. Press “-” or “+” to set the time. Press “ok” and “-” or “+” to set the minutes. Press “ok” to confirm the selection. To change the time Keep the “ok” button pressed for 2 seconds. Repeat the steps described above. Selecting the cooking function Turn knob 1 to the chosen function. Press “ok” to confirm; the oven will switch on. The indicator next to goes off when the selected temperature is reached. Turn knob5 and select the desired temperature. Important notes: to cancel any selection, turn knob 1 to “0”. Alternatively, press “ok” to switch the oven off, maintaining the previously selected functions. 3. Selecting the cooking time Select the cooking time (available with any function, except for the special functions) to turn the oven on for a specified period of time. At the end of the specified time the oven will switch off automatically. [. . . ] Use the accessories supplied and preferably dark coloured metal cake tins and oven trays. You can also use pans and accessories in pyrex or stoneware, but bear in mind that cooking times will be slightly longer. To obtain best results, carefully follow the advice given in the cooking table for the choice of accessories (supplied) to be placed on the various shelves. Cooking different foods at the same time Using the “CONVECTION BAKE” function, you can cook different foods which require the same cooking temperature at the same time (for example: fish and vegetables), using different shelves. Remove the food which requires less cooking time and leave food which requires longer cooking time in the oven. Desserts Cook delicate desserts with the conventional function on one shelf only. [. . . ]