User manual WHIRLPOOL PDCF 71102 A W PRODUCT FICHE

[. . . ] €¢ Turn the meat during grilling. €¢ Ideal for thawing frozen food at room temperature. €¢ The food should be placed in the oven in its wrapping to prevent it from drying out. €¢ To cook on one level (e. [. . . ] At the end of cooking time: Turn the knob to “0”. 5019 610 56224 FOOD Lamb/Veal/Beef/Pork Chicken/Rabbit/Duck Turkey/Goose Fish Stuffed peppers and tomatoes/roast potatoes Leavened cakes Filled pies Biscuits Lasagna Pizza/Bread Toast Cutlets/Sausages/Kebabs 1/2 chicken Whole chicken Roast beef Roasts Fish (whole) Function Level (from the bottom) 2 2 2 2 2 2 2 2 2 2 3/4 3/4 3 2/3 2 2/3 3 Temperature (°C) 200 190-200 200-210 190-200 190 180 180-190 180 190-200 225- 250 200-225 200-225 200-225 200-225 200-250 200-225 190-200 Cooking time min. 90-110 70-80 100-180 50-80 50-60 40-50 45-90 20-40 40-50 5-10 40-50 40-50 40-50 60-70 60-70 60-80 40-50 N. B: Cooking times and temperatures are approximate only. iNSTRUCTIONS FOR USING THE ELECTRONIC TIMER NUTID Electronic timer GB 1. Turn knob to “0” The time of day appears again on the display. selecting the end of cooking time 1 2 3 4 5  !" # Displays Function selector knob Setting button: (“set”) Confirmation button (“ok”) Buttons for changing time (“-” “+”) Thermostat knob Using this function it is possible to preset the end of cooking time. The maximum programmed cooking time is 23 hours and 59 minutes. Press “set” to set the end of cooking time: the indicator next to the symbol lights up . Set the end of cooking time using button “-” or “-” “+”. To change the previous temperature setting, turn knob #. To return to the residual cooking time, wait 5 seconds. Appearance of on the display: Once the set time has elapsed, an acoustic signal is heard and appears on the display. To change the cooking time, use button “-” or “-” “+”. Return to point 3 chapter “Selecting the cooking time”. Turn knob  to the self-cleaning Pyrolysis function, and for 2 seconds the display shows clean Cln, the selector automatically sets a minimum time of 1:30. Use buttons “+” “-”, to change duration of the self-clean cycle. The end of pyrolysis time can be set as follows: 1. press “set” to set the end of pyrolysis time. The indicator next to the symbol lights up. Set the end of pyrolysis time using buttons “+” “-”. [. . . ] When the set time has elapsed, an acoustic signal is heard and the display shows . Turn the knob  to “0”, the time of day appears again on the display. Pyrolysis function INSTRUCTIONS FOR USING THE ELECTRONIC TIMER NUTID Timer The timer can only be set when the oven is not in use and allows a maximum setting of 6 hours. The indicator next to the symbol lights up . [. . . ]