User manual WHIRLPOOL PDSU 6232/1 A PRODUCT FICHE

[. . . ] START BUTTON RESET FUNCTION: Press this button for at least 2 seconds; the selected program and options will be cancelled. Main failure displays (repeated flashing of the START indicator lamp) can be cancelled by RESETTING. Detailed instructions are given in chapter “What to do if. . . ”. START DELAY option ON/OFF BUTTON (see at right for options description) Table of programs Consumption Detergent P 1 2 3 4 5 Programs Pre-Wash Quickwash Eco 2) Daily cold 45°C 50°C 60°C Available options Loading instructions Litres kWh Minutes 1) RINSE AID INDICATOR When lit, the rinse aid dispenser needs to be refilled. Delay Crockery to be washed later. — 4. 0 0. 03 14 Delay Lightly soiled crockery, with no dried-on food. Energy-saving program. X* 11. 0 0. 80 30 Delay X 12. 0 1. 05 165 Delay Normally or heavily soiled crockery. [. . . ] Most faults can be remedied by taking the following courses of action, quickly restoring normal appliance operation. . . . is not working/will not start . . . shows “F1” on the display or the START indicator lamp flashes once . . . shows “F4” on the display or the START indicator lamp flashes 4 times . . . shows “F6” on the display or the START indicator lamp flashes 6 times . . . shows “F7” on the display or the START indicator lamp flashes 7 times . . . shows “F8” on the display or the START indicator lamp flashes 8 times Possible causes. . . “Delayed start” option is ON. The water supply temperature is below 3°C. Kinked water inlet hose or clogged inlet filters. Kinked water inlet hose or clogged inlet filters. Too little water in the dishwasher’s water system. - Check the household circuit fuse if there is no power supply. - Check if the dishwasher’s door is closed. - Check whether the “Delayed start” option (if available) has been selected. If it has, the appliance will only start once the set time has elapsed. - If you use a combined action detergent, try adding more rinse aid. - Synthetic materials do not dry well; if wet at end of cycle, wipe dry. Clean dishes left in dishwasher for a long time after end - In this situation, the presence of drops of water on dishes and on the sides of the dishwasher is normal. when using “delayed start” option). releasing the door 5 minutes before removing the dishes. Incorrect arrangement of the concave items in the rack. - Arrange crockery so that water does not collect in cavities. - Increase the dosage of rinse aid - see page 3, “Adding rinse aid”. - The rapid program is intended for quickly washing lightly soiled dishes. If used for a full load of medium/heavy soiled dishes, the dishes may not dry completely. If so, select a standard-length program. For best results, open the door after the end of the program and wait 15 minutes before unloading the dishwasher. [. . . ] - The open dishwasher door can only support the weight of the loaded rack when pulled out. Do not rest objects on the open door or sit or stand on it. - Sharp items that might cause injury (e. g. knives), must be placed in the cutlery basket with the sharp end facing downwards. [. . . ]