User manual WHIRLPOOL PFL/C 61000 PRODUCT FICHE

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual WHIRLPOOL PFL/C 61000. We hope that this WHIRLPOOL PFL/C 61000 user guide will be useful to you.

Lastmanuals help download the user guide WHIRLPOOL PFL/C 61000.

Download

You may also download the following manuals related to this product:

WHIRLPOOL PFL/C 61000 PROGRAM CHART (371 ko)

Manual abstract: user guide WHIRLPOOL PFL/C 61000PRODUCT FICHE

Detailed instructions for use are in the User's Guide.

 [. . . ] This programme is particurarly suitable to treat delicate lingerie (use of laundry net strongly recommended). Same as the last rinse and the final spin in the “Cotton” programme. In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.  [. . . ] Alternative method of terminating programme after “Rinse hold”. 

Intensive rinse
Super płukanie

Rinse hold
Stop płukanie

Spin
Wirowanie

Start delay

Rapid

Max Spin Speed rpm Max. 1000 1) –

Opóżnienie Szybki startu

Cotton 95 °C Cotton 40 - 60 °C Synthetics 40 - 60 °C Sport 30 °C Delicates 30 - 40 °C Daily load 40 °C Quick wash 30 °C Wool 20 - 40 °C Handwash 40 °C Lingerie 30 °C Rinse & Spin Spin Gentle spin Drain

BAWEŁNIANE 95 °C BAWEŁNIANE 40 - 60 °C SYNTETYCZNE 40 - 60 °C SPORT 30 °C DELIKATNE 30 - 40 °C

6. 0 6. 0

i i i

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes – – – –

i i i – i i i i i i i – – –

i i i – i – – – – – – – – –

i i i

i i i

i i i

i i i

– i i

3. 0

3. 0 1. 5 3. 0 3. 0 1. 0 1. 0 1. 0

i i – – – – – – – – –

i – i – – – – i – – –

i i i i i i i i – – –

i i i i i i i i i i –

i i i i i i i i i i i

i – – – – – – – – – –

40 °C PROGRAM SZYBKI 30 °C WEŁNIANE 20 - 40 °C PRANIE RÊCZNE 40 °C BIELIZNA 30 °C

– – – –

6. 0 6. 0 1. 0 –

i :	 option / Yes : dosing required 1)	 For improved garment care spin speed is restricted 	 in these programmes. 

5019 801 01008

CONSUMPTION DATA Programme
Cotton Cotton ** Cotton ** Cotton Cotton ** Synthetics Synthetics Sport Delicates Daily load Quick wash Wool Handwash Lingerie

Temperature (°C)
95 60 60 40 40 60 40 30 30 40 30 40 40 30

Load (kg)
6. 0 6. 0 3. 0 6. 0 3. 0 3. 0 3. 0 3. 0 1. 5 3. 0 3. 0 1. 0 1. 0 1. 0

Water (l)
59* 49 37 54 37 50* 46 56 50 45 40 55 45 45

Energy (kWh) without “Rapid”
1. 90 0. 78 0. 69 0. 65 0. 58 0. 70 0. 50 0. 65 0. 50 0. 45 0. 40 0. 60 0. 60 0. 50

Approx. programme duration (hours : minutes) without “Rapid” with “Rapid”
2:00 4:00 2:20 2:45 2:30 1:30 1:15 1:29 0:45 1:00 0:30 0:45 0:40 0:36 2:30 *** 1:45 *** 1:09 0:54 1:08 -

“Spin” button •	 Every programme has a predefined spin speed. •	 Press the button to set another spin speed. •	 If spin speed “0” is selected,  the final spinning is 	 cancelled but intermediate spin peaks remain 	 during rinse. “Rapid” button • 	Enables quicker washing by shortening the 	 programme duration. • 	Recommendable for small loads or only lightly 	 soiled laundry. 
START DELAY

FAILURE INDICATIONS

In case of any failures or irregularities,  consult the “Troubleshooting Guide” in your Instructions for Use. “Service” Lighting up of the “Service” indication can be caused by a fault in an electrical component. “Water tap closed” The washing machine has no or insufficient water supply; the water tap might be closed or the water inlet hose kinked. “Clean pump” Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see “Cleaning the filter” in your Instructions for Use). 
PROGRAMME END

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Do not use liquid detergent when activating “Start delay” option. •	 Select programme,  temperature and options. •	 Press the “Start delay” button to select the delay 	 time by 1,  3,  6,  9 or 12 hours. •	 Press the “Start/Pause” button. 	 The indication next to the “Start delay” button 	 blinks and the countdown of the delay time begins. •	 The time delay indication disappears when the 	 programme starts and it is replaced by the 	 programme sequence indication. • 	Once having pressed the “Start(Pause)” button,  	 the delay time can be reduced by pressing again 	 the “Start delay” button. To cancel the “Start delay” . . before you press the “Start/Pause” button: •	 Turn the programme selector to another position 	 or press the “Reset” button. . . after having pressed the “Start/Pause” button: •	 Press the “Start(Pause)” button - the light of the 	 selected start delay goes off. Press “Start/Pause” 	 again if you want to start the selected programme 	 immediately. 
PROGRAMME START

•	 All the lights of the programme sequence indicator 	 are off,  and the “Door open” indication lights up. 1. 	 Turn the programme selector to the “Off/O” 	 position.  [. . . ] 1. 	 Turn the programme selector to the “Off/O” 	 position. 3. 	 Open the door and unload the machine. 4. 	 Leave the door ajar to allow the drum to dry. 
CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. 	 Press the “Start/Pause” button to pause the 	 programme. 2. 	 Select the new programme (with temperature),  	 any options and another spin speed if you want.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL PFL/C 61000

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL PFL/C 61000 will begin.