User manual WHIRLPOOL PFV 90 W A PRODUCT FICHE

[. . . ] Any damage must be reported to the dealer within 24 hours of delivery of the appliance. Wait at least two hours before switching the appliance on, in order to ensure that the refrigerant circuit is fully efficient. Make sure installation and the electrical connection are carried out by a qualified technician according to the manufacturer's instructions and in compliance with the local safety regulations 4. Clean the inside of the appliance before using it. SAFEGUARDING THE ENVIRONMENT 1. [. . . ] The appliance is set for operation at specific ambient temperature ranges, according to the climatic class indicated on the data plate: The appliance may not work properly if it is left for a long period at a temperature above or below the indicated range. Climatic Class SN N ST T Amb. (°C) From 10 to 32 From 16 to 32 From 18 to 38 From 18 to 43 Amb. (°F) From 50 to 90 From 61 to 90 From 64 to 100 From 64 to 110 • Be careful not to damage the floors when you move the appliance (e. g. • Do not use mechanical, electric or chemical means other than those recommended by the Manufacturer to speed up the defrost process. • Do not damage the refrigerator’s refrigerant circuit pipes. • Do not use or place electrical appliances inside the compartments if they are not of the type expressly authorised by the Manufacturer. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they don't play with the appliance. • Power cable modification or replacement must only be carried out by qualified personnel. • Do not use single/multiple adapters or extension cables. • It must be possible to disconnect the appliance from the mains by unplugging it or by means of a two-pole switch fitted upline of the socket. • When shopping, leave frozen food purchases until last and transport the products in a thermally insulated cool bag. • Once at home, place the frozen foods immediately in the freezer. • If food has defrosted even partially, do not re-freeze it. • Avoid, or reduce temperature variations to the minimum. Respect the best-before date on the package. • Always observe the storage information on the package. 17 Removing the baskets • Pull the baskets out fully, then lift them up slightly in order to remove. Drawers (except the bottom drawer), runners and the white grid (if provided) may be removed in order to obtain increased storage space (Fig. 1) Ensure that the load does not exceed the limit (if present) indicated on the side walls of the appliance. 1 Compartment Use this compartment only for making ice cubes and storing ice packs, as shown in Fig. Always observe the storage times given on frozen food packaging. Making ice cubes • Fill the ice cube tray 2/3 full and place it in the special freezer compartment. • Do not use sharp or pointed instruments to detach the tray if it is stuck to the bottom of the freezer. • Bend the ice tray slightly to remove the cubes. [. . . ] • Plug in the appliance once again. Note: for electronic models, first insert the power plug into the mains socket and then press the on/off button to switch on the appliance. For the correct defrosting procedure, refer to the PRODUCT DESCRIPTION SHEET. CARE AND MAINTENANCE Before any cleaning or maintenance operation, unplug the appliance from the mains or disconnect the electrical power supply. For electronic models, first press the on/off button and then unplug the the appliance. [. . . ]