User manual WHIRLPOOL PURE 2486 PRODUCT FICHE

[. . . ] This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool. Textiles made of silk, linen, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool. Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and jackets. [. . . ] Do not use liquid detergent when activating the “Start delay”. • Select programme, temperature and options. • Press the “Start delay” button to select a delay time up to 23 hours. The light of the “Start (Pause)” button blinks. • Press the “Start (Pause)” button. The light of the “Start (Pause)” button is on. The light of the start delay button will keep blinking until the programme starts. • As soon as the programme starts, the start delay on the display is replaced by the remaining programme time, and the light of the “Start delay” button goes off. • Once having pressed the “Start (Pause)” button, the number of hours preselected can be changed by pressing and holding the “Start delay” button. To cancel the “Start delay” . . . before you press “Start (Pause)”: • Turn the programme selector to another position or press the “Reset/Drain” button. . . . after having pressed “Start (Pause)”: • Press “Start (Pause)” - the delay time disappears from the display. • This option is particularly suitable for areas with very soft water, washing baby linen and helping people with allergies. “Variable spin” button (incl. “Rinse hold” ) • Every programme has a predefined spin speed. • Press the button to set another spin speed. • If you select spin speed “0”, the final spinning is cancelled but intermediate spin peaks remain during rinse. • If you select “Rinse hold” , the laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing. Select “Rinse hold” if you want to postpone spinning to a later time or if you want to drain only. Do not leave the laundry to soak in the rinse hold for too long. The programme stops to “Rinse hold” when the “Rinse hold” light in the programme sequence indicator is on. The “Start (Pause)” button light blinks. To terminate the “Rinse hold” by draining the water, without any spinning, press the “Start (Pause)” button. [. . . ] Any time you try to change a programme setting with active child lock, the display will shortly show the key-like symbol. The programme setting cannot be changed anymore. The only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock: • Press again the 2 buttons marked with the key symbol simultaneously for at least 3 seconds. SELECT ANY DESIRED OPTION Push the button(s) of any option(s) desired - the respective indication lights up. [. . . ]