User manual WHIRLPOOL PWA 920 A PROGRAM CHART

[. . . ] Spin Speed rpm A Programme Care Labels B C Type of wash / Notes Detergents and additives Special Options TemperaMax. ture load Prewash Main Softener Bleach Bi Intensive Rinse Wash Speed Rinse Hold kg °C Cotton with prewash Synthetic with prewash Delicate with prewash Cotton Coloured Cotton Mixed cotton/Synthetic Synthetic Delicate Wool Handwash Rinse + Gentle Spin Rinse + Spin Spin Gentle spin Drain Heavily soiled bed linen, table linen and underwear, towels, shirts etc. Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton. [. . . ] Programme to spin cotton or linen laundry intensively with maximum spin speed. Programme to spin delicate laundry gently with a restricted spin speed. Alternative method of terminating programme after “Rinse Hold”. — — — — — — — — — — — — — N. B. Please avoid excessive detergent dosing. 5019 812 10013 CONSUMPTION DATA Programme Cotton Cotton Cotton Synthetic Synthetic Delicate Wool Handwash Temperature Selector (°C) 95 60 40 60 40 40 40 30 Load (kg) 5. 0 5. 0 5. 0 2. 0 2. 0 1. 5 1. 0 1. 0 Water (l) 63* 59 59 56 56 60 60 60 Energy (kWh) 1. 80 0. 95 0. 55 0. 80 0. 40 0. 55 0. 50 0. 30 Approx. Programme Duration (hours : minutes) 2:05 2:05 2:05 1:30 1:30 0:45 0:40 0:50 “Rinse Hold” button • The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from fading. • This option is particularly recommended for the “Synthetic”, “Delicate” and “Daily Mixed” programmes. • This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only. Note: the programme selector knob stops on . Appliance in “Rinse Hold”: • Press the “Rinse Hold” button again: the programme will terminate automatically with the selected spin cycle. • If you do not wish to spin the clothes, press the “On/Off” button, turn the programme selector knob to the “Drain” programme and press the “On/Off” button again. PROGRAMME START Turn on the tap and press the “On/Off” button. The indicator light of the “On/Off” button lights up. Note: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted. END OF WASH CYCLE • The programme selector knob is in the Stop position. Press the “On/Off” button to switch off the machine. Wait for the lid to unlock (about 1 minute). Open the lid and the drum doors and unload the machine. CHANGE THE PROGRAMME DURING THE WASH CYCLE 1. Switch off the machine by pressing the “On/Off” button. Start programme by pressing the “On/Off” button again. PAUSE/INTERRUPT A PROGRAMME If, for any reason, you wish to interrupt the programme for a certain time and continue it later: 1. [. . . ] Turn the temperature selector knob to the desired temperature. SELECT THE DESIRED OPTION Selecting or deselecting an option can be done at any time during the programme. The option will be applied as long as the corresponding programme phase has not been executed yet. “Bi Speed” button • Press the button to set the spin speed. Note: every programme has an automatic maximum spin speed. [. . . ]