User manual WHIRLPOOL PWF 3626 PRODUCT FICHE

[. . . ] Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start Delay” accordingly. Yes Yes Yes max. 1000 1) Super Eco Eco Plus 20 - 60 °C 7. 0 Yes max. Lingerie Wool Handwash Rinse & Spin Spin Gentle Spin Drain Dessous Wolle Handwäsche Spülen & Schleudern Schleudern Schonschleudern Abpumpen 20 - 30 °C 20 - 40 °C 20 - 40 °C 1. 0 This programme is particularly suitable to treat delicate lingerie (use of a laundry net strongly recommended). 1. 0 This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool. [. . . ] • Press the button to set another spin speed. • If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only. “DOOR OPEN” INDICATION Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”. START DELAY The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”. • Select programme, temperature and options. • Press the “Start delay” button to select the delay time by 1 to 23 hours. • Press the “Start” button. The indication light next to the “Start delay” button lights up and the countdown of the delay time begins. The dot between hours and minutes of the indicated delay time as well as the light of the start delay button will keep blinking until the programme starts. “Intensive rinse” button • More water is added and rinse cycle is prolonged. • This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies. “Rinse hold” button • The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing. • This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”. PROGRAMME END • 1. All the lights of the programme sequence indicator are off, and the “Door open” indication lights up. Turn the programme selector to the “Off/O” position. Leave the door ajar to allow the drum to dry. SELECT ANY DESIRED OPTION Push the button of any option desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically. “Eco” button • With a modified temperature profile and a prolonged programme duration, the optimum combination of good washing result and lower energy consumption is achieved. “Prewash” button • Only for heavily soiled loads (for example sand, granular dirt) sensible. [. . . ] • If you select “Rinse hold”, do not leave the laundry to soak for too long. Note: The programme stops to “Rinse hold” at the time the “Rinse hold” light in the programme sequence indicator is on. The indication lamp next to the “Start” button blinks. Terminate the “Rinse hold” option: • Press the “Start” button. [. . . ]