User manual WHIRLPOOL RE 141 I INSTRUCTION FOR USE

[. . . ] • After unpacking the appliance, make sure that the door shuts properly. Any damage must be reported to your dealer within 24 hours after delivery of the appliance. Wait at least two hours before connecting the appliance to the power supply in order to ensure the refrigerant circuit is fully efficient. Appliance installation and electrical connections must be carried out by a qualified electrician, in accordance with the manufacturer's instructions and local regulations. • • • • • PROTECTING THE ENVIRONMENT 1. [. . . ] • Do not place food in direct contact with the rear wall of the refrigerator compartment. • Do not place hot food in the refrigerator. • Store liquids in closed containers. . 12 37089Gb. fm5 Page 13 Tuesday, May 2, 2000 6:08 PM HOW TO DEFROST THE APPLIANCE Defrost the appliance when the ice formation on the walls reaches 3 mm. Make sure that the water-collecting tray is empty and properly positioned under the low temperature compartment. 1) • Push the button (A) in the center of the thermostat knob and close the door. When the ice on the walls has melted completely, the button will return to its initial position and the appliance will restart automatically. 2) Appliances without defrosting button: • Turn the thermostat knob to the defrosting position. • When defrosting is complete, turn the knob back to its initial position. It is not necessary to empty the rest of the appliance. Do not use sharp or pointed metal instruments to scrape off ice. 1) CARE AND MAINTENANCE Before any cleaning or maintenance operation, unplug the appliance from the mains or disconnect the electrical power supply. • Clean the interior regularly with a sponge soaked in warm water and/or neutral detergent. • Rinse the interior and dry thoroughly. • Clean the inside of the low temperature compartment when defrosting. • Clean the outside with a damp cloth. Do not use abrasive products, scourers, stain-removers (e. g. acetone, trichloroethylene) nor vinegar. • Regularly clean air vents and the condenser at the rear of the appliance with a vacuum cleaner or a brush. When not in use, leave the door of the appliance open to prevent oxidation and the formation of mould and unpleasant odours. Clean the appliance. Prolonged disuse 1. Defrost and clean the interior. . 13 37089Gb. fm5 Page 14 Tuesday, May 2, 2000 6:08 PM TROUBLESHOOTING GUIDE The appliance is not working. Is the plug properly inserted in the mains socket? [. . . ] Make sure it is level, adjusting the front feet if necessary. Make sure that the air vent at the top of the appliance is unblocked, to allow air circulation. Clean the inside of the appliance and fit the supplied accessories. Fill the ice cube tray (if supplied) with water and put it into the low temperature compartment. Electrical connection • • • Electrical connections must be made in accordance with local regulations. [. . . ]