User manual WHIRLPOOL S21W2 D INSTRUCTION FOR USE

[. . . ] Description of function - OVEN OFF LAMP MLTF (Heat Maintenance) Top shelf Bottom shelf 35°C - 60°C - STATIC 200°C 50°C - 250°C • To cook meat, fish and chicken on the same level. € Preheat the oven to the required cooking temperature and place food in the oven as soon as all the thermostat indicators are on. € Ideally, the second or third shelf level should be used. € To cook on up to two different shelf levels. [. . . ] Wait until the residual the first part of the cooking cycle. To select this function, turn the knob to heat indicator for the cooking zone begins to flash, then turn the knob anti-clockwise to the desired ICP (initial cooking power setting. : if level “1” is selected, the cooking zone will work on full power for 1 minute, after function) which it will continue on power setting“1” until the end of cooking, unless the knob is turned to adjust the power setting. If level “6”is selected, the cooking zone will work on full power for 6 minutes, after which it will continue on power setting “6” until the end of cooking, unless the knob is turned to adjust the power setting. This function can be used with all power settings, except for power setting “10”. This function is used to bring water to the boil rapidly and remains on for a preset time. At the end of the preset time, the cooktop automatically returns to the maximum power setting. This function can be selected even during cooking. Important: Before selecting this function, make sure the pot is positioned on the selected cooking zone in order to avoid any damage to the cooktop surface. The stated performance values for this function are those guaranteed for all glass ceramic cooktops. For this function, place the pot on the selected cooking zone and turn the knob to . : to display or modify the previous temperature setting turn knob ᕅ one click. To return to the display of the remaining time wait 20 seconds, or press button ᕄ. to use the Extra browning Functions”. And Food warmer special functions, consult the chapter “Special 2. Turn the knob ᕅ within 10 seconds to set the time of day. The display will show the time of day blinking. Press button ᕄ or wait 10 seconds to have the setting accepted automatically. To modify the time: above the symbol will blink). Repeat the steps Press button ᕄ twice (the indicator described above. Turn knob ᕃ to the chosen function: the display will show the selected temperature or grill level blinking. If the displayed value is correct, press button ᕄ to confirm or wait 10 seconds to have the setting accepted automatically. [. . . ] Important notes: To cancel any selection, turn knob ᕃ to “0”. Keeping button ᕄ down for 5 seconds deactivates the audio signal associated with the manipulation of knobs and buttons. The audio signal is enabled again by pressing button ᕄ for 5 seconds. For safety reasons, the oven switches off automatically after 4'30" of continuous operation (except for the Light and ). [. . . ]