User manual WHIRLPOOL SRA20NE INSTALLATION

[. . . ] Installation and the electrical connection must be carried out by a qualified technician, according to the manufacturer’s instructions and local safety regulations. Clean the inside of the appliance before using it. SAFEGUARDING THE ENVIRONMENT 1. Packing The packing material is 100% recyclable and bears the recycling symbol. For disposal, comply with the local regulations. [. . . ] In this way the temperature inside the meat drawer is kept lower than the rest of the refrigerator. The air flow can be adjusted by means of the special slider. • To store vegetables in the meat drawer, shift the control device all the way to the left, to the vegetables setting. This avoids possible damage due to the vegetables freezing. Crisper moisture control device • The level of humidity inside the crisper can be adjusted by moving the slider in the desired position. • By moving the slider to the far right, humidity will be eliminated from the compartment. This setting is better for preserving fruits and vegetables with skin. • By moving the slider to the far left, humidity is maintained inside the compartment. This setting is better for preserving leaf vegetables. 27 USING THE APPLIANCE FIRST USE Connect the appliance to the water system and power supply (refer to the Installation manual). When switching on the appliance for first use, or after replacing the filter, the filter icon shows three dashes. In time their number will decrease, depending on the use of the appliance and the natural wear of the filter charge itself. When all the dashes disappear and the icon starts flashing, the filter needs replacing. To activate the function press the menu button until the fast freezing symbol appears on the left of the display. The symbol starts flashing and the freezer door icon comes on. The function will automatically deactivate after 24 hours. It can also be deactivated manually at any time by repeating the procedure. Fast cooling (refrigerator) This function is used to speed up the cooling process for fresh foods. This function is activated by pressing the menu button until the fast cooling symbol appears on the right of the display. The symbol starts flashing and the refrigerator door icon comes on. Press OK to confirm The function will automatically deactivate after 6 hours. It can also be deactivated manually at any time, by repeating the procedure. Vacation This function deactivates the refrigerator compartment if the user is going away for sometime. This function is activated by pressing the menu button until the vacation symbol appears. [. . . ] If the ice dispenser stops working: • Are the ice cubes stuck because the ice dispenser has not been used for some time?Shake the ice bucket to separate the cubes and increase the holding capacity. It is advisable to throw away the old ice cubes and make new ice. • Has the ice dispenser lever been pressed for too long? [. . . ]