User manual WHIRLPOOL SUPER ECO 8412 PRODUCT FICHE

[. . . ] If in doubt, do not use the washing machine. contact After-Sales Service or your local retailer. €¢ Keep the packaging materials (plastic bags, polystyrene parts, etc. ) out of reach of children, as they are potentially dangerous. [. . . ] Please note: Use only specific detergents for washing wool and garments made of microfibres (like sports or swimwear). Remarks: • Any whitish residues on dark fabrics are caused by insoluble compounds used in phosphate-free powder detergents. If this occurs, shake or brush out the fabric or use liquid detergents. €¢ Use only detergents and additives specifically produced for domestic washing machines. €¢ When using descaling agents, dyes or bleaches for the prewash (if available on your model), make sure that they are suitable for use in domestic washing machines. Descalers could contain products which could damage your washing machine. €¢ Do not use any solvents (e. Do not machine wash fabrics that have been treated with solvents or flammable liquids. €¢ Do not use liquid detergent for the main wash when having activated the “prewash” option (if available on your model). €¢ Do not use liquid detergent when activating the “Start Delay” function (if available on your model). Dosage Follow the dosage recommendations on the detergent pack. If the washing machine stands in a room prone to frost, you have to drain residual water after each wash to avoid damages. IMPORTANT: make sure the water has cooled before draining the appliance. €¢ Dry the door seal after each washing with an absorbent cotton cloth; make sure that the door seal is completely dry before closing the door of the empty washing machine. €¢ Check the condition of the door seal periodically. Filter • Check and clean the filter regularly, at least two or three times a year (see “Draining Residual Water/Cleaning The Filter”). Do not use flammable fluids for cleaning the appliance. pUSH Cleaning the detergent dispenser 1. Pull out the dispenser drawer until it stops. Press with your finger on the space of the siphon being marked with “PUSH” (fig. €œA”) to release the drawer and pull it out completely. Remove the siphon from the softener chamber by pulling it upwards (fig. [. . . ] €œF02” or “FA” “Service” “F18” or “FoD” If any of the faults described above persist, unplug the appliance, turn off the water tap and contact our After-Sales Service (see next chapter). gB 10 AFTER-SALES SERVICE Before contacting After-Sales Service: 1. Try to remedy the problem yourself (see “Troubleshooting Guide”). Restart the programme to check whether the problem has solved itself. [. . . ]