User manual WHIRLPOOL TGA340V/EG/IX PRODUCT FICHE

[. . . ] - After inserting food, ensure that the freezer compartment door closes properly. HOW TO START THE APPLIANCE Fit the spacers (if supplied) on the upper part of the condenser at the rear of the appliance. After plugging the appliance to the mains, it starts the operation automatically. After starting the appliance, wait at least 4-6 hours before placing food into the appliance. The indicator LEDs on the control panel light up for approximately 1 second, and after initialization process, setpoint is displayed. [. . . ] Note: - If food is placed in the refrigarator before the appliance has cooled completely, it may deteriorate. FAN WITH A BUTTON The fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. To switch on the fan press the button (1a). It is advisable to activate the fan when the ambient air temperature is over 27 ÷ 28°C or if you perceive drops of water on the glass shelves or in difficult humidity conditions. Note: Do not obstruct the air intake area with food items. The fan will run ONLY when the compressor is in operation. Remember to turn off the fan when there is a lower ambient air temperature. If the appliance has the fan it can be equipped with the antibacterial filter. Remove it from the box found in the crisper drawer (item 7) and insert into the cover of fan (item 1b). The replacement procedure is attached with the filter. CONTROL PANEL DESCRIPTION 1 2 3 4 TO INCREASE STORAGE The freezer compartment can be used without the baskets / flap to increase storage and for large products. When the Night Tariff LED is OFF the function is not active. Note: appliance energy consumption is declared with "NIGHT TARIFF" function disabled. ABNORMAL APPLIANCE OPERATION GUIDE TO SELECTING FUNCTIONS FAST COOLING The use of this function is recommended when placing a very high quantity of food in the refrigerator compartment Fast cooling Refrigerator sensor failure Refrigerator & Evaporator sensor failure Led ON When the product is plugged in to the mains, during first 10 minutes of its performance, possible temperature sensor failure will be displayed according to following table: Refrigerator Evaporator sensor failure Legend Led ON By pressing and hold the pushbutton on the control panel for 3 sec. it is possible to increase the cooling speed of the foods inside the refrigerator compartment. The Fast Cooling light ( yellow LED) will turn on. The function is automatically deactivated after 6 hours. The Fast Cooling function can be manually deactivated by pressing and hold the same pushbutton on the control panel for 3 sec. , the yellow LED is off. Note: - Fast Cooling function should be also switched ON before placing fresh food to be frozen in the freezer compartment. - Fast Cooling function has to be engaged in order to maximize freezing capacity, thus it has to be engaged before to add fresh ECO GREEN (depending on the model) This function gives best food preservation performance with the smallest energy consumption possible (around 5-10% less in comparison with the normal settings - middle temperature ) if there is lower amount of food to be preserved in the appliance. When ECO GREEN function is activated only these ECO compartments should be used in order to have the perfect food preservation: - 2 "eco green" shelves in the fridge (with green frames) - 1 "eco green" basket in freezer compartment To active the Eco Green function press the pushbutton on the control panel to choose the mid–high temperature, as showed here below: Eco Green Legend Led OFF Led Flashing The appliance will work preserving the food stored, but it is The appliance will work preserving the food stored, but it is necessary to contact aftersales service and provide alarm code. DEFROSTING THE FREEZER COMPARTMENT No Frost freezers provide chilled air circulation around the storage areas and prevent the formation of ice, thereby completely eliminating the need for defrosting. [. . . ] - Fast Cooling function has to be engaged in order to maximize freezing capacity, thus it has to be engaged before to add fresh ECO GREEN (depending on the model) This function gives best food preservation performance with the smallest energy consumption possible (around 5-10% less in comparison with the normal settings - middle temperature ) if there is lower amount of food to be preserved in the appliance. When ECO GREEN function is activated only these ECO compartments should be used in order to have the perfect food preservation: - 2 "eco green" shelves in the fridge (with green frames) - 1 "eco green" basket in freezer compartment To active the Eco Green function press the pushbutton on the control panel to choose the mid–high temperature, as showed here below: Eco Green Legend Led OFF Led Flashing The appliance will work preserving the food stored, but it is The appliance will work preserving the food stored, but it is necessary to contact aftersales service and provide alarm code. DEFROSTING THE FREEZER COMPARTMENT No Frost freezers provide chilled air circulation around the storage areas and prevent the formation of ice, thereby completely eliminating the need for defrosting. Frozen items don't stick to the walls, labeling stays legible and storage space remains neat and clear. DEFROSTING THE REFRIGERATOR COMPARTMENT Refrigerator compartment defrosting is completely automatic. Droplets of water on the rear wall inside the refrigerator compartment indicate that the automatic defrost phase is in progress. [. . . ]