User manual WHIRLPOOL UXB1200DYS INSTALLATION

[. . . ] Before servicing or cleaning the unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction. Do not operate any fan with a damaged cord or plug. [. . . ] Motor support bracket Motor spring clip 5 - 6 x 1 mm nuts 5 - 4. Install the 6 mm nuts to the outside top or outside back (alternate location on some models) of the range hood at the proper location for the selected motor system. Two 6 mm nuts are required for the single motor system. Clip nuts into the small square notches located at the left and right end of the square vent opening. Five 6 mm nuts are required for the dual motor system. Clip nuts into the small square notches, one located in the front of the square vent opening and the other four located at the left and right ends of the square vent opening. Mount range hood using the Installation Instructions that came with your range hood model. Install the range hood blower motor assembly inside the range hood canopy with the wiring connection to the left for the single motor system and to the front or top for the dual motor system. Run the power supply wires and connector through the hole in the right end of the motor mounting plate. Push the right end of the motor mounting plate up and snap it into the spring tab. NOTE: The spring tab should be outside the slot in the mounting plate. When calling for assistance or service, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request. If you need replacement parts If you need to order replacement parts, we recommend that you use only factory specified parts. Factory specified parts will fit right and work right because they are made with the same precision used to build every new appliance. To locate factory specified replacement parts in your area, call us or your nearest designated service center. Features and specifications on our full line of appliances. Specialized customer assistance (Spanish speaking, hearing impaired, limited vision, etc. Whirlpool designated service technicians are trained to fulfill the product warranty and provide afterwarranty service, anywhere in the United States. To locate the Whirlpool designated service company in your area, you can also look in your telephone directory Yellow Pages. If you need further assistance, you can write to Whirlpool Corporation with any questions or concerns at: Whirlpool Brand Home Appliances Customer eXperience Center 553 Benson Road Benton Harbor, MI 49022-2692 Please include a daytime phone number in your correspondence. Our consultants provide assistance with: Features and specifications on our full line of appliances. [. . . ] If outside the 50 United States and Canada, contact your authorized Whirlpool dealer to determine if another warranty applies. If you need service, first see the "Troubleshooting" section of the Use & Care Guide. After checking "Troubleshooting, " you may find additional help by checking the "Assistance or Service" section or by calling Whirlpool. Keep this book and your sales slip together for future reference. [. . . ]