User manual WHIRLPOOL UXL5430BSS INSTALLATION GUIDE

[. . . ] 31 RANGE HOOD SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This symbol alerts you to potential hazards that can kill or hurt you and others. [. . . ] nOTE: Frameless type cabinets require ¾" (1. 9 cm) thick filler strip (not supplied) may be required for some types of cabinets. 3 cm) rectangular opening in the cabinet top is required for damper transition clearance. E D Venting Outside Through the Wall Install the 6" (15. 2 cm) vent transition to the top of the range hood liner using two 3. Assemble the vent duct that you will use over the 6" (15. Measure from the bottom of the range hood liner to the horizontal centerline of the vent opening (A). Bottom must be cut flush to the inside walls of the cabinet. From the inside of the cabinet front face D. 9 cm) thick front face required for cabinet bottom. Complete cabinet preparation following the instructions for your type of venting. Failure to do so can result in back or other injury. Using 2 or more people, lift the hood liner into its mounted location. If needed, insert spacers between each side of the canopy and the mounting plate to space and center the canopy in the cabinet. Align the bottom of the canopy with the bottom of the cabinet. (For some installations): A filler strip may be required for some cabinets. install a filler strip and secure with two 4. 5 x 13 mm screws from inside the front of the hood liner assembly. Install the vent system according to the method needed. Use caulking to seal the exterior wall or roof opening. Remove the metal grease filters from the face panel. Attach the face panel to the hood liner. [. . . ] This major appliance is designed to be repaired in the home and only in-home service is covered by this warranty. Repairs to parts or systems resulting from unauthorized modifications made to the appliance. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an authorized Whirlpool servicer is not available. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance with published installation instructions. [. . . ]