User manual WHIRLPOOL UXT2030AYB

[. . . ] 4 CM) RANGE HOOD Installation Instructions and Use & Care Guide For questions about features, operation/performance, parts, accessories or service, call: 1-800-253-1301 or visit our website at www. Com In Canada, call 1-800-807-6777 or visit our website at www. 29 RANGE HOOD SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. [. . . ] Lift the range hood and set it upside down onto covered surface. If cabinet has recessed bottom, add wood filler strips on each side. Mark a line distance “A” from the right of the centerline on the underside of the wall. Mark the point on this line that is ⁷ ⁄₈" (2. 2 cm) from the underside of the cabinet. 2 cm) diameter hole through the rear wall at this point. 8 cm) Round Vent To make a circular vent openings on the underside of the cabinet top and bottom: 1. Mark a centerline on the underside of the top of cabinet. 7 cm) from the back wall on the underside of the top and bottom of cabinet. Use a compass or a circle template to draw a circle with a diameter that is ¼" (0. Use saber or keyhole saw to cut the circular vent opening. Determine and clearly mark a vertical centerline on the wall and cabinet in the area the vent opening will be made. Cabinet cutouts A *From wall, not cabinet frame A. Mark a line distance “A” from the right of the centerline on the underside of the cabinet. Mark the point on this line that is 2" (5. 2 cm) diameter hole through the cabinet at this point. Install vent through the vent opening in upper cabinet or wall. Complete venting system according to the selected venting method. Use caulking to seal exterior wall or roof opening around the cap. 1 cm) from wall, not cabinet frame Centerline A. 3 cm) 7 Install Range Hood NOTE: Your model will have a 7" (17. 8 cm) round vent mounting plate on the inside of your range hood. [. . . ] Service to correct improper product maintenance or installation, installation not in accordance with electrical or plumbing codes or correction of household electrical or plumbing (i. Damage from accident, misuse, abuse, fire, floods, acts of God or use with products not approved by Whirlpool. Repairs to parts or systems to correct product damage or defects caused by unauthorized service, alteration or modification of the appliance. Cosmetic damage including scratches, dents, chips, and other damage to the appliance finishes unless such damage results from defects in materials and workmanship and is reported to Whirlpool within 30 days. [. . . ]