User manual WHIRLPOOL UXT5236AYS INSTALLATION GUIDE

[. . . ] 4 CM) RANGE HOOD Installation Instructions and Use & Care Guide For questions about features, operation/performance, parts, accessories or service, call: 1-800-253-1301 or visit our website at www. Com In Canada, for assistance, installation and service, call 1-800-807-6777 or visit our website at www. 32 RANGE HOOD SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. [. . . ] cabinet cutouts *¹⁄₂" (1. 3 cm) To make a circular vent opening on the underside of the cabinet top: 1. Mark a centerline on the underside of the top of cabinet. 7 cm) from the back wall on the underside of the top of cabinet. Use a compass or a circle template to draw a circle with a diameter that is ¼" (0. Use saber or keyhole saw to cut the circular vent opening. 7 cm) *From wall, not cabinet frame Wall Venting To make a 3½" x 10½" (8. Make 2 lines by measuring ³⁄₈" (0. 8 cm) down from underside of cabinet and mark on the centerline on the back wall. 3 cm) to the right and left of the centerline on the wall. Use saber or keyhole saw to cut a rectangular opening in the wall for the vent. Centerline Cabinet front Cabinet cutouts *From wall, not cabinet frame Style 3 - Cut Openings for 7" (17. 8 cm) Round Vent To make a circular vent openings on the underside of the cabinet top and bottom: 1. Mark a centerline on the underside of the top of cabinet. 7 cm) from the back wall on the underside of the top and bottom of cabinet. Use a compass or a circle template to draw a circle with a diameter that is ¼" (0. For optional power supply cord kit installations, follow the instructions in the “Make Electrical Connection” section. See the “Accessories” section for information on ordering. NOTES: ■ B A C D E ■ Use only with range hood cord connection kits that have been investigated and found acceptable for use with this model range hood. Do not reconnect power until the installation is complete. Remove the screw from the terminal box cover. Horizontal vent connector with damper A B ■ If a vent damper is installed with a wall cap with damper, check that they do not interfere with each other. [. . . ] Service to correct improper product maintenance or installation, installation not in accordance with electrical or plumbing codes or correction of household electrical or plumbing (i. Damage from accident, misuse, abuse, fire, floods, acts of God or use with products not approved by Whirlpool. Repairs to parts or systems to correct product damage or defects caused by unauthorized service, alteration or modification of the appliance. Cosmetic damage including scratches, dents, chips, and other damage to the appliance finishes unless such damage results from defects in materials and workmanship and is reported to Whirlpool within 30 days. [. . . ]