User manual WHIRLPOOL WA 54 DI PRODUCT FICHE

[. . . ] Same as the spin cycle in the “Wool” programme. — — — — — Drain only - no spinning. — ❉: 1) = optional / Yes = dosing required. For improved garment care, spin speed is restricted to 400 rpm in this programme. 5019 401 05383 Black process 45. 0° 100. 0 LPI 40105383GB. fm Page 2 Tuesday, March 27, 2007 6:32 PM CONSUMPTION DATA Temperature Programme (°C) Cotton Cotton Cotton Synthetics Synthetics Delicates Daily load Quick wash Wool Handwash 95 60 40 60 40 30 40 30 40 40 PROGRAMME START Load (kg) 5. 5 5. 5 5. 0 2. 5 2. 5 1. 5 3. 0 3. 0 1. 0 1. 0 PROGRAMME END • All the lights of the programme sequence indicator are off, and the “Door open” indication lights up. Turn the programme selector to the “Off/O” position. Leave the door ajar to allow the drum to dry. [. . . ] CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START 1. Press the “Start” button to pause the programme. Select the new programme and, if you want, another spin speed and any options. Press the “Start” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme. CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END The “Reset” button cancels a programme before the end. • Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened. Water (l) 59** 49 56 50** 46 60 41 41 60 45 Energy (kWh) 1. 90 1. 04 0. 70 0. 80 0. 50 0. 50 0. 50 0. 40 0. 50 0. 50 Approx. Programme Duration (hours : minutes)* 2:00 2:10 2:00 1:35 1:20 0:45 1:00 0:30 0:45 0:40 Open the tap and press the “Start” button. Turn the programme selector to the desired programme and temperature. The time display shows the duration of the chosen programme (in hours and minutes), and the indication lamp next to the “Start” button flashes. The indication lamp of the predefined spin speed lights up. SELECT ANY DESIRED OPTION Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically. “Prewash” button • Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min. “Intensive rinse” button • More water is added and rinse cycle is prolonged. • This option is particularly suitable for areas with very soft water, washing baby linen and helping people with allergies. • Selectable only on the lowest temperature step of each programme. [. . . ] “Intensive rinse” button • More water is added and rinse cycle is prolonged. • This option is particularly suitable for areas with very soft water, washing baby linen and helping people with allergies. • Selectable only on the lowest temperature step of each programme. “Rinse hold” button • The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing. • This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”. [. . . ]