User manual WHIRLPOOL WA STAR 56 EX PRODUCT FICHE

[. . . ] 2. 5 Trevira), polyamide (Perlon, Nylon) or blends withoption can be additionally With heavily soiled laundry the additional “Prewash” selected. Curtains and delicate clothing, dresses skirts, shirts and blouses. 1. 5 With heavily soiled laundry the additional “Prewash” option can be additionally selected. ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ max. SuperEco 60 °C SuperEco 60 °C — Yes ❉ ❉ — — — ❉ ❉ ❉ max. Synthetics 30 - 40 - 60 °C Pflegeleicht 30 - 40 - 60 °C Feinwäsche 30 - 40 °C ❉ ❉ — — — — — — — — Yes Yes Yes Yes Yes Yes Yes ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ — — ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ — — — — — — — — — ❉ ❉ — — — — — — — — ❉ — ❉ — — — — — — — ❉ — ❉ — — — — ❉ — — ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ — — ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ — 1000 1) 1000 1) max. max. Delicates 30 - 40 °C Daily load 40 °C Mischwäsche 40 °C 3. 0 Slightly to normally soiled textiles made of cotton and/or synthetics. [. . . ] For improved garment care, spin speed is restricted to 1000 rpm in this programme. For improved garment care, spin speed is restricted to 400 rpm in this programme. 5019 401 05465 Black process 45. 0° 150. 0 LPI 40105465GB. fm Page 2 Friday, October 31, 2008 12:31 PM CONSUMPTION DATA Programme White Cotton / Hygienic + Cotton*** Cotton SuperEco Synthetics Synthetics Delicates Daily load Quick wash Wool Handwash Lingerie Temperature (°C) 95 60 40 60 60 40 30 40 30 40 40 30 Load (kg) 6. 0 6. 0 5. 0 6. 0 2. 5 2. 5 1. 5 3. 0 3. 0 1. 0 1. 0 1. 0 Water (l) 59** 49 56 51 50** 46 60 41 41 60 45 45 Energy (kWh) 1. 90 1. 02 0. 70 0. 72 0. 80 0. 50 0. 50 0. 50 0. 40 0. 50 0. 50 0. 40 Approx. Programme Duration (hours : minutes)* 2:00 2:20 2:00 4:00 1:35 1:20 0:45 1:00 0:30 0:45 0:40 0:40 • If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start” button. “Variable spin” button • Every programme has a predefined spin speed. • Press the button to set another spin speed. • If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only. RED INDICATIONS “Service” Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service. “Water tap closed” The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use. “Clean pump” Waste water is not pumped out. • Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions. • Prolongs the programme by approx. • Appropriate for use of stain removers and bleaches on oxygen basis. Chlorine or perborate bleaches must not be used!“Prewash” button • Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min. “Easy ironing” button • Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier. • Increases the water quantity and the clothes are spun very gently. “Intensive rinse” button • More water is added and rinse cycle is prolonged. • This option is particularly suitable for areas with very soft water, washing baby linen and helping people with allergies. • Selectable only on the lowest temperature step of each programme. [. . . ] Select the new programme and, if you want, another spin speed and any options. Press the “Start” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme. PROGRAMME START Open the tap and press the “Start” button. [. . . ]