User manual WHIRLPOOL WAB 8795 PROGRAM CHART

[. . . ] Curtains and delicate dresses, skirts, shirts and blouses. Textiles made of silk, linen, wool and viscose marked as “handwashable”. If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme. [. . . ] • Select programme, temperature and options. • Press the “Start Delay” button to select the delay time by 1 to 23 hours; • Press the “Start/Pause” button. • The time delay indication disappears when the programme starts and it is replaced by the remaining time. • The number of hours preselected can later be reduced pressing again the “Start Delay” button. To cancel the “Start Delay”. • Turn the programme selector to the “ ” position. • Reselect the desired programme and options and press the “Start/Pause” button. CANCEL A PROGRAMME BEFORE THE END Press the “Reset” button. Any existing water is drained out before the door can be opened. CHILD LOCK Detailed information can be found in the instructions for use. The controls can be locked to avoid interference by children. If the machine is off: Turn the programme selector knob from the “0” position to any programme. Do not press the “Start/Pause” button. Press the “Child Lock” button for 5 seconds. The “Child Lock” indicator lights up. Turn the programme selector knob to the OFF position “ ” again. While a programme is running: Press the “Child Lock” button for 5 seconds. Now, in spite of the programme selector knob being turned, no programme can be started or altered. However, a running programme can be stopped at any time (e. g. in an emergency), by turning the programme selector knob to “ ”. Attempts at changing during the running programme are signalled by the lamp flashing. The indicator light for the actual programme running goes on. To unlock the controls, the machine must either have a programme running or be in select mode. Press the “Child Lock” button for 5 seconds. [. . . ] The pilot lamp of the “Start/Pause” button lights up. The indicator lamps shows the sequence reached in the programme. After starting the programme, the sequence indication runs from left to right through Prewash, Wash, Rinse, Spin. When a sequence of the programme is finished the corresponding lamp goes out. DOOR LOCK After each programme start the door is locked and approx. [. . . ]