User manual WHIRLPOOL WAK 6360/2 INSTALLATION

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual WHIRLPOOL WAK 6360/2. We hope that this WHIRLPOOL WAK 6360/2 user guide will be useful to you.

Lastmanuals help download the user guide WHIRLPOOL WAK 6360/2.


Mode d'emploi WHIRLPOOL WAK 6360/2
Download

You may also download the following manuals related to this product:

   WHIRLPOOL WAK 6360/2 PROGRAM CHART (213 ko)
   WHIRLPOOL WAK 6360/2 INSTRUCTION FOR USE (342 ko)

Manual abstract: user guide WHIRLPOOL WAK 6360/2INSTALLATION

Detailed instructions for use are in the User's Guide.

[. . . ] € • • Read this “INSTALLATION GUIDE” before operating. Keep this “INSTALLATION GUIDE” for future reference. Read the general recommendations about disposing of packaging in the Instructions for use. [. . . ] Slacken the locknut clockwise (see arrow) using the wrench C supplied. Lift slightly the machine and adjust the height of the foot revolving it. Important: tighten the locknut by turning it anti-clockwise towards the appliance casing. If the water inlet hose is not already installed, it must be screwd to the appliance. Screw by hand the inlet hose onto the tap tightening the nut. attention: • no kinks in the hose!€ The appliance must not be connected to the mixing tap of an un-pressurized water heater. € Check water-tightness of connections by turning the tap completely on. € If the hose is too short, replace it with a suitable length of pressure resistant hose (1000 kPa min, EN 50084 approved type). € Check the inlet hose regularly for brittleness and cracks and replace if necessary. € The washing machine can be connected without a non-return valve. For models with Water Stop hose: If the flexible hose is too short, replace it with a 3 m Water Stop hose (available from AfterSales Service or from your dealer). This replacement is only to be carried out by a trained electrician. Depending on the model, the inlet hose and the plastic enclosure at the tap connection contain electrical components. Do not cut the hose and do not immerse the plastic enclosure in water. Isolate the appliance from the mains immediately if the hose is damaged. [. . . ] do not use extension leads or multi sockets. The electrical power cable must be replaced exclusively by a licensed electrician. Electrical connections must be made in accordance with local regulations. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WAK 6360/2

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WAK 6360/2 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag