User manual WHIRLPOOL WAK 6661 PROGRAM CHART

[. . . ] 1. 5 Curtains andsoiled laundry the additionalskirts, shirtsoption can be additionally selected. With heavily “Prewash” ❉ ❉ — — — — — — — — — Yes Yes Yes Yes ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ — — — ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ — ❉ — — — — — — — — — — ❉ ❉ — — — — — — — — — ❉ — ❉ — — — — ❉ — — — ❉ — ❉ — — — — — — — — ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ — 600 1) 600 1) 800 800 600 1) 400 2) 400 2) 800 800 600 1) Delicates 30 - 40 °C Daily load 40 °C 3. 0 Slightly to normally soiled textiles made of cotton and/or synthetics. 3. 0 Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. Only woollens with a felt-free finish, labelled with the woolmark and identified as Quick wash 30 °C 30 °C Wool Cold - 40 °C - 40 °C 40 °C 30 °C 1. 0 machine washable. If you select “Rinse Hold” do not leave items to soak for too long. Textiles made of linen, silk, wool and viscose marked as “handwashable”. Yes Yes Yes Handwash 40 °C 1. 0 If you select “Rinse Hold” do not leave items to soak for too long. [. . . ] The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The time display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display. “DOOR OPEN” INDICATION Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”. RED INDICATIONS “Service” Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service. “Water tap closed” The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use. “Clean pump” Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”). PROGRAMME END • All the lights of the programme sequence indicator are off, and the “Door open” indication lights up. Turn the programme selector to the “Off/O” position. Leave the door ajar to allow the drum to dry. CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START 1. Press the “Start” button to pause the programme. Select the new programme and, if you want, another spin speed and any options. Press the “Start” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme. CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END cancels a programme The “Reset” button before the end. [. . . ] “Intensive rinse” button • More water is added and rinse cycle is prolonged. • This option is particularly suitable for areas with very soft water, washing baby linen and helping people with allergies. • Selectable only on the lowest temperature step of each programme. “Easy ironing” button • Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier. [. . . ]