User manual WHIRLPOOL WAK 6750/2 INSTRUCTION FOR USE

[. . . ] Remove the packaging and check • After unpacking, make sure that the washing machine is undamaged. If in doubt, do not use the washing machine. Contact After-Sales Service or your local retailer • Check that the accessories and supplied parts are all present • Keep the packing material (plastic bags, polystyrene parts, etc. ) out of reach of children, as they are potentially dangerous 4. [. . . ] Pour about 1 litre of water into the detergent drawer to reactivate the Eco system. Check that the foreign body trap is seated properly and tightly in place. Especially: • When the appliance does not drain or spin properly • If the pump is blocked by a foreign body (e. Buttons, coins or safety pins) IMPORTANT: make sure the water has had time to cool before draining the appliance. Open the filter cover with the help of the coloured insert from the detergent container. Open the filter but do not withdraw it completely. Slowly turn the handle anticlockwise until the water drains out. Draining Residual Water Before emptying the residual water, switch the appliance off and unplug it from the mains socket. Open the cover to the foreign body trap. Open the filter cover with the help of the coloured insert from the detergent container. Open the filter but do not withdraw it completely. Slowly turn the handle anticlockwise until the water drains out. Wait until all the water has drained off. Now unscrew the filter completely and remove it. Tilt the appliance forwards carefully to allow the water to flow out. Insert the filter with the guide pin upwards and screw it in clockwise to the stop (handle horizontal). Before using the washing machine again: 1. 1 litre of water into the detergent drawer to reactivate the Eco system. Fm5 Page 24 Tuesday, March 19, 2002 6:16 PM Care And Maintenance Appliance exterior and control panel • Can be washed down with a soft, damp cloth • A little neutral cleaner (not abrasive) can be used • Dry with a soft cloth Door seal • Clean with a damp cloth when necessary • Check the seal folds for foreign bodies periodically Filter • We recommend that you check and clean the filter regularly, at least two or three times a year see “Removing The Filter”) Detergent dispenser 1. Press the release lever in the prewash compartment downward and remove the drawer. Check whether: • the washing machine is level and standing firmly on all four feet • the transport bolts have been removed. Before using the washing machine, it is imperative that the transport bolts are removed The appliance will not start, no lamp lights up. [. . . ] For models with no fault display, continue the programme by pressing the “On/Off” button again. If the fault occurs again, please contact After-Sales Service (see “After-Sales Service”). €œWater Stop” fault when the programme selector switch is in the “ ” position. The pump is switched on automatically in order to pump the water out. [. . . ]