User manual WHIRLPOOL WAT 360 PROGRAM CHART

[. . . ] Normally soiled cotton jeanswear and garments made of jeanslike material such as trousers and jackets. Normally to heavily soiled and robust white cotton laundry. Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition to your detergent. White and pastel shaded garments made of delicate fabrics. [. . . ] The previously saved programme setting will be replaced by the new one. START DELAY The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”. • Select programme, temperature, spin speed and options. • Press the “Start delay” button to select the delay time up to 23 hours. • Press the “Start” button. The countdown of the delay time begins; the clock symbol next to the delay time and the dot between hours and minutes blink. • The time delay indication disappears when the programme starts and it is replaced by the remaining programme time. • Once having pressed the“Start” button, the number of hours preselected can be reduced by pressing and holding the “Start delay” button. From one hour on, the delay time can also be reduced in steps of 10 minutes. To cancel the “Start delay” . . before you press the “Start” button: • Select another programme or press the “Reset/Drain” button. . . after having pressed the “Start” button: • Press “Start“ - the delay time disappears from the display; press “Start“ again to start the selected programme immediately. PROGRAMME START Open the tap and press the “Start” button. The blinking light next to the “Start” button becomes constant. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. “LID OPEN” INDICATION Before starting and after end of a programme, the symbol appears on the display to show that the lid can be opened. As long as a wash programme is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Reset a running programme before the end”. LOCK BUTTONS You can lock the buttons of the control panel against improper use (e. g. • Press the temperature and spin speed button simultaneously and hold them for at least 3 seconds. The key symbol on the display lights up. [. . . ] 2. The temperature and spin speed indicated on the display can be altered by pressing the “Temperature” button or the “Spin” button. The light next to the “Start” button blinks. SELECT ANY DESIRED OPTION When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically. [. . . ]