User manual WHIRLPOOL WBC3546 A FCX PROGRAM CHART

[. . . ] - The internal temperatures of the appliance depend on the ambient temperature, frequency of opening the doors, as well as location of the appliance. Temperature setting must consider these factors. - The appliance accessories are not suitable for washing in a dishwasher. The fan helps to achieve a better temperature distribution inside the refrigerator compartment, and optimizes food storage conditions. [. . . ] Important: • If food is placed in the refrigerator before the appliance has cooled completely, it may deteriorate. • Turning the refrigerator and freezer controls to a cooler than recommended setting will not cool the compartments any faster. • A built-in exterior moisture control continuously guards against moisture build-up on the front edges. Do not be alarmed if these edges sometimes feel warm to the touch. The inside light switches on when the refrigerator door is opened. After 10 minutes of door opening the light switches off. GUIDE TO SELECTING FUNCTIONS Functions are not available until freezer compartment reaches the temperature below -12°C. Functions and settings for the refrigerator compartment. GB To select the function, keep pressing the menu button until the display shows the vacation symbol. To turn the refrigerator back to setting point repeat this procedure. Important: after activating this function, remove all perishable foodstuffs from the refrigerator compartment and leave the door closed, since the refrigerator maintains a suitable temperature to prevent the formation of unpleasant odours. ON/OFF This function turns off both the refrigerator and freezer compartments. To enable the stand-by function, press & hold the "On-Off" button for 3 seconds, two hyphens appear on both display to indicate that the appliance is in stand-by. To switch the appliance on again, follow the same procedure until the previously set temperature is shown on the display. When the appliance is in stand-by the light inside the refrigerator compartment does not work. Remember that this operation does not disconnect the appliance from the power supply. Fridge Stand-by This function turns off the fridge compartment while the freezer compartment continue to run. To enable the stand-by function, press & hold the "Fridge stand-by" button for 3 seconds. To switch the fridge compartment on again, follow the same procedure until the previously set temperature is shown on the display. When the fridge compartment is in standby the light inside the refrigerator compartment does not work. Functions and settings for the freezer compartment Freezer compartment temperature setting Refrigerator compartment door open Fast freezing For more efficient freezing activate this function 24 hours before freezing fresh food. To select the function, keep pressing the menu button until the display shows the fast freeze symbol . After 24 hours place the food to be frozen in the middle basket of freezer compartment. [. . . ] Listeria indicator - avarage temperature of the whole compartment (depending on model). Right temperature inside the refrigerator The symbol indicates the coldest zone in the refrigerator compartment. For optimum temperature adjustment, the refrigerator is provided with a temperature indicator to allow you control the average temperature. D GB F NL E P I GR S N DK FIN PL CZ SK H RUS BG RO PRODUCT SHEET Checking the temperature After the appliance has been switched on for at least 24 hours, can be checked if the temperature in the refrigerator is correct and, if necessary, adjust the setting as indicated in the user instructions (see "Adjusting the temperature"). • Assemble again the light cover putting at first the upper catches to the holes, than close and push the lower catches in its place, hearing "click effect". [. . . ]