User manual WHIRLPOOL WBE3321 NFS PRODUCT FICHE

[. . . ] - In case of power failure the cold accumulator helps to keep optimal storage temperature longer. - All shelves and door trays are removable. - The internal temperatures of the appliance depend on the ambient temperature, frequency of opening the doors, as well as location of the appliance. Temperature setting must consider these factors. [. . . ] - The appliance accessories are not suitable for washing in dishwasher. - After inserting food, ensure that the freezer compartment door closes properly. D GB F NL E P I GR S N DK The Organizing Mat is a mat designed to better organize the space on the shelf, and to provide a soft-touch experience when loading heavy items on the shelf. Some slots could also be used to host bottles (horizontally positioned). In order to remove it (for cleaning purpose, or to use it on top of another shelf), first remove the shelf where it is currently placed. The mat is dishwashable. NET SHELF (depending on the model) The Net Shelf is the net which can be used to store little items directly under the glass shelf, taking full advantage of this space. Pull down the net shelf (using the lip on the front) to load/unload it. The net is flexible: do not stress it by loading it with bulky or heavy items. To remove the net (for cleaning purpose, or to use it under another shelf), you have to first remove the glass shelf under which the net is currently placed. The net shelf is dishwashable. HOW TO START THE APPLIANCE Fit the spacers (if supplied) on the upper part of the condenser at the rear of the appliance. Temperature selection pushbutton is used to set desired temperature level, from warmest through lower to coldest . Pressing pushbutton setpoint will change cyclically. Temperature set-point is done for both compartments at one time - fridge and freezer. At first plug-in of appliance factory set-point is chosen medium position. The Fast Cooling light ( yellow LED) will turn on. The function is automatically deactivated after 6 hours. The Fast Cooling function can be manually deactivated by pressing and hold the same pushbutton on the control panel for 3 sec. , the yellow LED is off. Note: - Fast Cooling function should be also switched ON before placing fresh food to be frozen in the freezer compartment. - Fast Cooling function has to be engaged in order to maximize freezing capacity, thus it has to be engaged before to add fresh food. ECO GREEN (depending on the model) This function gives best food preservation performance with the smallest energy consumption possible (around 5-10% less in comparison with the normal settings - middle temperature ) if there is lower amount of food to be preserved in the appliance. [. . . ] - Fast Cooling function has to be engaged in order to maximize freezing capacity, thus it has to be engaged before to add fresh food. ECO GREEN (depending on the model) This function gives best food preservation performance with the smallest energy consumption possible (around 5-10% less in comparison with the normal settings - middle temperature ) if there is lower amount of food to be preserved in the appliance. When ECO GREEN function is activated only these ECO compartments should be used in order to have the perfect food preservation: D GB F NL E P I GR S N DK FIN PL CZ SK H RUS BG RO UKR CA PRODUCT SHEET - 2 "eco green" shelves in the fridge (with green frames) - 1 "eco green" basket in freezer compartment To active the Eco Green function press the pushbutton on the control panel to choose the mid–high temperature, as showed here below: Eco Green GB DEFROSTING THE REFRIGERATOR COMPARTMENT Refrigerator compartment defrosting is completely automatic. Droplets of water on the rear wall inside the refrigerator compartment indicate that the automatic defrost phase is in progress. [. . . ]