User manual WHIRLPOOL WBE3623 NFXF PROGRAM CHART

[. . . ] In order to remove it (for cleaning purpose, or to use it on top of another shelf), first remove the shelf where it is currently placed. Cooler compartment (best for meat and fish) 6. Storage zones for frozen food items (basket or flap) 16a. [. . . ] The net shelf is dishwashable. HYDROSENSE SHELVES The special contour of the HydroSense shelves creates a barrier that contain spills and simplifies cleanup, preventing liquids from leaking onto shelves below. HOW TO START THE APPLIANCE Fit the spacers (if supplied) on the upper part of the condenser at the rear of the appliance. After plugging the appliance to the mains, it starts the operation automatically. After starting the appliance, wait at least 4-6 hours before placing food into the appliance. The indicator LEDs on the control panel light up for approximately 1 second, and after initialization process, setpoint is displayed. DK FIN PL CZ SK H RUS BG RO PRODUCT SHEET Note: - If food is placed in the refrigarator before the appliance has cooled completely, it may deteriorate. Following table shows set-points level: High temperature Mid-high temperature (Eco Green) Middle temperature Mid-low temperature GB FAN WITH A BUTTON The fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. To switch on the fan press the button (1a). It is advisable to activate the fan when the ambient air temperature is over 27 ÷ 28°C or if you perceive drops of water on the glass shelves or in difficult humidity conditions. Note: Do not obstruct the air intake area with food items. The fan will run ONLY when the compressor is in operation. Remember to turn off the fan when there is a lower ambient air temperature. If the appliance has the fan it can be equipped with the antibacterial filter. Remove it from the box (found in the crisper drawer (item 7) and insert into the cover of fan (item 1b). The replacement procedure is attached with the filter. Low temperature Description: Led ON Led OFF "FAST COOLING" function Fast cooling The use of this function is recommended when placing a very high quantity of food in the refrigerator compartment Fast cooling CONTROL PANEL DESCRIPTION By pressing and hold the pushbutton on the control panel for 3 sec. it is possible to increase the cooling speed of the foods inside the refrigerator compartment. The Fast Cooling light (yellow LED) will turn on. The function is automatically deactivated after 6 hours. The Fast Cooling function can be manually deactivated by pressing and hold the same pushbutton on the control panel for 3 sec. , the yellow LED is off. Note: - Fast Cooling function should be also switched ON before placing fresh food to be frozen in the freezer compartment. [. . . ] If necessary unscrew the broken bulb and replace it with the new one (max power of the light bulb is given on the light cover). LED's LIGHTING If the inside LED light is not working, it must be replace by service. Description: Led OFF Led Flashing The appliance will work preserving the food stored, but it is necessary to contact after-sales service and provide alarm code. DEFROSTING THE FREEZER COMPARTMENT No Frost freezers provide chilled air circulation around the storage areas and prevent the formation of ice, thereby completely eliminating the need for defrosting. Frozen items don't stick to the walls, labeling stays legible and storage space remains neat and clear. DEFROSTING THE REFRIGERATOR COMPARTMENT Refrigerator compartment defrosting is completely automatic. [. . . ]