User manual WHIRLPOOL WBM 602 PRODUCT FICHE

[. . . ] Any damage must be reported to the dealer within 24 hours of delivery of the appliance. Wait at least two hours before switching the appliance on in order to ensure that the refrigerant circuit is fully efficient. Installation and electrical connection must be carried out by a qualified technician according to the manufacturer’s instructions and in compliance with local safety regulations. Clean the inside of the appliance before using it. SAFEGUARDING THE ENVIRONMENT 1. [. . . ] Third step: removing the crisper drawer lid • Slide the crisper drawer lid outwards. • Remove the lid. Crisper drawer Crisper drawer divider Crisper drawer lid 10 63602074GB. fm Page 11 Wednesday, September 16, 2009 5:36 PM TO REPLACE THE CRISPER DRAWER LID First step: replacing the crisper drawer lid • Insert the back of the lid into the runners. Second step: replacing the crisper drawer divider • Refit the divider in the specific slots located on the bottom of the compartment and crisper drawer wall as shown in the figure. Third step: replacing the crisper drawers • Replace the drawer on the wheels. Important: • When shopping, leave frozen food purchases until last and transport the products in a thermally insulated cool bag. • Place the items in the freezer compartment as soon as you get home. • Avoid, or reduce temperature variations to the minimum. • Respect the best-before date on the package. • Always observe the storage information on the package. SEALING When sealing food in bags, squeeze out the air first. Place labels on the inside of clear freezer bags; use self-adhesive labels on the outside of opaque ones. Fasten the top of the bag with a string. DEFROSTING Here are some helpful tips. Do not use extension leads or adapters. Disconnecting the appliance It must be possible to disconnect the appliance by unplugging it or by means of a double-pole switch isolating the socket. 15 63602074GB. fm Page 16 Wednesday, September 16, 2009 5:36 PM DOOR REVERSIBILITY 1. Unscrew the two screws which are fixing the middle hinge. Also remove the two big caps on the left. 1) Remove the two big caps Figure 1 2. Dismantle the refrigerator and frezeer door from cabinet by pulling towards to you together with the middle hinge. Remove the kick plate by pulling forward. Unscrew the bottom hinge fixing screws and remove it. Unscrew the pin of hinge from Hole 1, rotate the bottom hinge 90° and screw the pin to Hole 2. (See Detail A) Then screw the hinge to bottom left side of refrigerator. 3) Figure 2 Hole 1 Hole 2 Detail-A Bottom hinge and kick plate Figure 3 4. Unscrew the screw fixing the top hinge cover and remove it. [. . . ] When the door is opened, humidity from the room air enters the refrigerator. The more often the door is opened, the faster humidity builds up, especially when the room itself is very humid. • If the room is very humid, it is normal for moisture to build up inside the refrigerator. • It is normal for droplets of water to form on the back wall after the refrigerator self-defrosts. [. . . ]