User manual WHIRLPOOL WBV3699 NFC IX PROGRAM CHART

[. . . ] After starting the appliance, wait at least 4-6 hours before placing food into the appliance. When the appliance is connected to the power supply, the display lights up and all the icons appear on the display for few seconds. The default (factory) values of the freezer compartment and refrigerator compartment settings light-up. FAN WITH A BUTTON The fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. It is advisable to keep the fan active, so that the "6th Sense Fresh Control" / "Green Intelligence ProFresh" function can work properly and also when the ambient air temperature is above 27 ÷ 28°C or if you perceive drops of water on the glass shelves or in the severe humidity conditions. [. . . ] If one of these special functions has been selected, the "Zero Degrees" box must be deactivated manually, and any fresh food inside it removed. If manual deactivation does not take place, the box will be deactivated automatically after 8 hours. D GB F NL E P I GR S N DK FIN PL CZ SK H RUS BG RO UKR CA AE PRODUCT SHEET between +2°C and + 8°C, as shown by the Fridge Temperature LEDs. Freezer Temperature To adjust the Freezer Temperature inside, press the Freezer °C button. The Freezer Temperature can be adjusted between -16°C and -24°C, as shown by the Freezer Temperature LEDs. Fast Cool Using Fast Cool function it is possible to increase the cooling in the refrigerator compartment. The use of this function is recommended when placing a very high quantity of food in the refrigerator compartment. the Fridge °C button to activate/deactivate Fast Cool function. When activated, the Fast Cool indication will be displayed by the Fridge Temperature LEDs as shown in the beside sequence. The function is automatically disabled after 6 hours, or can be manually disabled by pressing Fridge °C button. Fast Freeze The use of this function is recommended when placing a very high quantity of food to be frozen in the freezer compartment. 24 hours before freezing fresh food, press & hold for 3 sec. the Freezer button to activate the Fast Freeze function. When activated, the Fast Freeze indication will be displayed by the Freezer Temperature LEDs as shown in the beside sequence. After 24 hours place the food to be frozen in the upper basket of freezer compartment. The function is automatically disabled after 48 hours, or can be manually disabled by pressing Freezer °C button. Eco Night: Eco Night function allows to concentrate the energy consumption of the product during off-peak time (usually coinciding with night time), when energy is available in large quantity and it costs less than during the day (only in specific countries using multiple-rate system based on off-peak times - check your rate plan with your utility company). To activate the function, press the Eco Night button at the starting moment of the off-peak rate (depending on your specific rate plan). For example, if the off-peak rate starts at 20:00, you have to press the button at that time. When the Eco Night icon is ON, the function is active. After you activate the function, the product automatically starts to adapt the energy consumption to the time, i. e. consuming less energy during the day then during the night. IMPORTANT: In order to work in a correct way, the function must be active both during the night and the day. [. . . ] After 10 minutes of door opening the light switches off. Printed in Poland 02/12 MALFUNCTION AND ALARM INDICATIONS: Operation Alarms In the event of operation alarms, they will also be displayed in the Fridge Temperature LEDs, (e. g. Failure1, Failure 2, etc. . . ) call After-sales Service and specify the alarm code. The acoustic alarm sounds, the Alarm icon lights up and the 3 central LEDs in the Fridge Temperature LEDs blinks according to failure code described below: Failure code Error 2 Error 3 Error 6 Visualization RC & FC Set points blink on/off at 0, 5 sec. Blinks ON 2 times then remain off for 5 seconds. [. . . ]