Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual WHIRLPOOL WCF 9. We hope that this WHIRLPOOL WCF 9 user guide will be useful to you.
Lastmanuals help download the user guide WHIRLPOOL WCF 9.
Manual abstract: user guide WHIRLPOOL WCF 9PROGRAM CHART
Detailed instructions for use are in the User's Guide.
[. . . ] 6gb33006. fm5 Page 1 Wednesday, May 9, 2001 5:08 PM
PRODUCT DESCRIPTION SHEET
1. Defrost water drain plug (depending on model). [. . . ] After installation, wait for at least two hours without moving the appliance before connecting it to the power supply. If the freezer is left empty for short periods, it is preferable not to switch it off. Frost formation on the upper edges and interior walls of the appliance is a natural phenomenon and will not affect the performance of the freezer.
ROK GB
6gb33006. fm5 Page 2 Wednesday, May 9, 2001 5:08 PM
Switching on the freezer for the first time
• • • • It is advisable to set the thermostat to a middle position on the thermostat scale (factory set position). Also the red LED will switch on because the temperature inside the freezer is not yet sufficiently low for food storage. The red LED will normally switch off within the first six hours after the appliance is switched on. Place food inside the freezer only when the red LED has switched off. It will prove difficult to open the lid immediately after closing it because the hermetic seal means there is a partial vacuum inside the freezer. Wait a few minutes before re-opening the lid.
• •
After connecting the appliance to the mains, once the right temperature has been reached (about an hour), ensure that the fast freeze function is inactive (yellow LED is off).
Temperature adjustment
You can adjust freezer temperature as follows: • Turn the thermostat knob x to position 1 to set the highest (least cold) storage temperature. • Turn the thermostat knob x to position 6 / to set the lowest (coldest) storage temperature. • When the freezer is only partially full, it is advisable to set the thermostat to lower positions (towards position “E”, if indicated on the thermostat scale).
Energy saving tips
• • • • • • • Do not install the appliance in places exposed to direct sunlight or near heat sources. Do not obstruct the ventilation grille or the air circulation openings. Remove accumulated dust from the rear of the appliance at least once a year. [. . . ] Unscrew the light bulb and replace it with an identical bulb of the same wattage and voltage. Refit the diffuser and plug in the appliance.
5019 613 33006
ROK GB
Printed in Italy
05/01 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WCF 9
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WCF 9 will begin.
