User manual WHIRLPOOL WDE150LVQ WARRANTY INFORMATION

[. . . ] See the product dimensions illustration. Models rated from 12. 7 kW at 240 volts (9. 5 at 208 volts) require a separate 50-amp circuit. [. . . ] Flexible conduit from appliance should be connected directly to the junction box. C F B* A. 27¹/" (69. 9 cm) height to underside of cooktop edge with leveling legs screwed all the way in* C. Model/serial number plate (located below the electronic control on oven frame) D. 28/" (71. 9 cm) from handle to standoff at back of range** F. 23³/" (60. 3 cm) countertop notch to rear of cooktop D E** *Range can be raised approximately 1" (2. 5 cm) by adjusting the leveling legs. **When installed in a 24" (61. 0 cm) base cabinet with 25" (63. 5 cm) countertop; front of oven door protrudes 2¹/" (6. 4 cm) beyond 24" (61. 0 cm) base cabinet. CABINET OPENING DIMENSIONS A B C Cabinet opening dimensions shown are for 25" (64. 0 cm) countertop depth, 24" (61 cm) base cabinet depth and 36" (91. 4 cm) countertop height. If you have a square finish (flat) countertop and the opening width is 30" (76. 2 cm), no countertop preparation is required. Formed front-edged countertops must have molded edge shaved flat ³/" (1. 0 cm) from each front corner of opening. Tile countertops may need trim cut back ³/" (1. 0 cm) from each front corner and/or rounded edge flattened. If countertop opening width is greater than 30" (76. 2 cm), adjust the ³/" (1. 0 cm) dimension. Check levelness by placing level on countertop, first side to side, then front to back. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. [. . . ] Check levelness by placing level on countertop, first side to side, then front to back. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. [. . . ]