User manual WHIRLPOOL WEL98HEBU

[. . . ] If you have any problems or questions, visit us at www. Couverture arrière DRYER SAFETY 2 IMPORTANT: When discarding or storing your old clothes dryer, remove the door. 3 ACCESSORIES Enhance your new washer and dryer with the following genuine Whirlpool accessories. For more information on options and ordering, call 1-800-442-9991, or visit us at: www. [. . . ] The dryer will automatically set the drying time and temperature.  Before starting an Auto cycle, press and hold the LCD control button for Dryness Level for 6 seconds. The LCD will briefly display the regular Dryness Level options, then change to show the default setting options.  Press the LCD control button for the desired setting.  Press the BACK button to return to the main screen for the selected cycle. Select any additional options (options vary by model) 10 Add additional options such as Static Reduce, Smart Grid, Wrinkle Shield™ with Steam, and/or EcoBoost™ by pressing the button for that option. NOTE: n  ot all options and settings are available with all cycles, N and not all features and cycles are available on all models. N  n model WEL98 only, see the “Smart Feature Sheet” O for information about setting up Smart functionality, turning it on and off, receiving important notifications, and taking advantage of available features. Remote Start (model WEL98 only) Remote Start MY CYCLE AND SPECIALTY CYCLES MY CYCLE You may store up to 7 frequently used custom cycles in My Cycle for quick access. Remote Start Remote Start allows you to start your dryer remotely using the Smartappliances app. Make this selection last using the System Settings button and the LCD control button. Make sure that your dryer remains closed and the cycle is not adjusted until you start the cycle.  ress the LCD control button for Remote Start.  ress the LCD control button for the desired setting. If the dryer is turned off, M the Remote Start feature will turn off. If you try to add another custom cycle and all 7 custom storage spaces are filled, you will need to delete a saved custom cycle before saving the new one. Use the t and u arrow keys to scroll through the saved custom cycles until the desired cycle is displayed. Press the selector button under the desired cycle. Press and hold START/PAUSE to begin cycle SPECIALTY CYCLES Specialty cycles are designed for a specific purpose, such as washing pillows or comforters. To select a specialty cycle, turn the Cycle Control knob to Specialty, then select the desired cycle from the display screen using the selection buttons. Press and hold the START/PAUSE button to begin the cycle. If you will be unable to remove the load promptly, press the Wrinkle Shield™ with Steam button and select the desired Wrinkle Shield™ option before pressing START/PAUSE. [. . . ] This warranty gives you specific legal rights, and you also may have other rights that vary from state to state or province to province. If outside the 50 United States and Canada, contact your authorized Whirlpool dealer to determine if another warranty applies. If you think you need repair service, first see the “Troubleshooting” section of the Use & Care Guide. If you are unable to resolve the problem after checking “Troubleshooting, ” additional help can be found by checking the “Assistance or Service” section or by calling Whirlpool. [. . . ]