User manual WHIRLPOOL WFW94HEAW WARRANTY INFORMATION

[. . . ] This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING. You can be killed or seriously injured if you don't immediately follow instructions. You can be killed or seriously injured if you don't follow instructions. [. . . ] Similar to the way garments are hand washed in a sink, the wash action of this cycle combines periods of low speed tumbling and soaking. CRADLE CLEANTM motion offers gentle fabric care for safe and effective cleaning of delicate and hand washable garments. Use mesh garment bags to wash undergarments such as underwire bras, items with strings, and small items such as infant socks. Use this cycle to clean machine washable woolen garments. (Check the care instructions to make sure that garment is washable. ) CRADLE CLEANTM motion offers gentle fabric care for safe and effective cleaning of washable wool. To change the preset cycle settings Press the selector of each available setting until the desired setting glows green. Use this cycle to clean heavily soiled, colorfast fabrics. This cycle combines a super hot water temperature and fast speed tumbling to help ensure the removal of heavy soils and stains. It is recommended that you set your hot water heater to 120ºF (49ºC) to ensure proper performance during this cycle. Use this cycle to clean washable silk garments. NOTE: For the best energy performance, use the Normal/Casual Cycle. Use the Soak cycle to help remove small spots of set-in stains on fabrics. This cycle provides a soak time with warm or cold water followed by drain. Extra water, a short tumbling phase for equal distribution of the laundry, and a soaking time without drum movement improve the removal of set-in stains. Use this cycle to get a rinse and spin only. This cycle combines fast-speed tumbling and extra high speed spin. If desired, you can reduce the spin speed by selecting the speed you want from the SPIN SPEED modifier. To begin the wash cycle later, select DELAY WASH until the desired delay time (in hours) shows in the Estimated Time Remaining display, and then select START. The countdown to the wash cycle will show in the display window, and the button indicator will blink until the cycle begins. IMPORTANT: When delaying a cycle, use only powdered detergents in the main wash compartment since liquid detergents may seep out of the compartment during Delay Wash, before the wash cycle begins. Use this cycle to drain your washer or to drain and spin your wash load. [. . . ] service must be provided by a Whirlpool designated service company. This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the country in which it was purchased. Outside the 50 United States and Canada, this limited warranty does not apply. Proof of original purchase date is required to obtain service under this limited warranty. [. . . ]