User manual WHIRLPOOL WGT3300XQ DIMENSION GUIDE

[. . . ] 27" (69 cm) Gas Washer/Dryer PRODUCT MODEL NUMBERS WGT3300X Dimensions/Clearances Front View 1 / 27. 54" (692 mm) Side View 47 / " (1213 mm) 3 4 Back View 271/4" (692 mm) 26" (660 mm) 11" (279 mm) 3 / 71. 54" (822 mm) 653/4" (1670 mm) 713/4" (1822 mm) 713/4" (1822 mm) 14" (356 mm) 321/8" (816 mm) 34" (864 mm) 411/4" (1, 048 mm) 351/4" (895 mm) 261/2" 25" (673 mm) (635 mm) 1" (25 mm) 32" (813 mm) 1" (25 mm) 1" (25 mm) Clearances Side Clearances (recommended/minimum) Front/Back/Top (recommended/minimum) 12" (305 mm) Recessed area or closet installation 48 in. 2 (310 cm2) 3" (76 mm) Front View Closet door 3" (76 mm) 24 in. 2 (155 cm2) 1"/0" (25 mm/0 mm) 1"/0" (25 mm/0 mm) 1" (25 mm) (Closet) 5" (127 mm) Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. [. . . ] Minimum siphon break: 28" (710 mm) from bottom of washer/dryer. (Additional hoses may be needed. ) Floor standpipe drain system Minimum diameter for a standpipe drain: 2" (51 mm). Top of standpipe must be at least 39" (990 mm) high; install no higher than 96" (2. 4 m) from bottom of washer/dryer. If you must install higher than 96" (2. 4 m), you will need a sump pump system. Laundry tub drain system Wall standpipe drain system See requirements for floor standpipe drain system. Minimum capacity: 20 gal. Top of laundry tub must be at least 39" (990 mm) above floor; install no higher than 96" (2. 4 m) from bottom of washer/dryer. IMPORTANT: To avoid siphoning, no more than 4. 5" (113 mm) of drain hose should be inside standpipe or below the top of wash tub. [. . . ] (5. 8 m) Louvered hood Box hood Angled hood NOTE: Side exhaust installations have a 90º turn inside the dryer. To determine maximum exhaust length, add one 90º turn to the chart. [. . . ]