User manual WHIRLPOOL WIC3C24PE FULL

[. . . ] In order to receive a more complete assistance, please register your appliance on: www. Eu/register You can download the Safety Instructions and the Use and Care Guide, by visiting our website http://docs. Eu and following the Instructions on the back of this booklet. Before using the appliance carefully read Health and Safety guide. [. . . ] 12h) from the start of the selected wash cycle will be increased. Select the wash program and close the door: the timer will begin counting down; 3. Once this time has elapsed, the indicator light switches off and the wash cycle begins. To adjust the delay time and select a shorter period of time, press the DELAY button. To cancel it, press the button repeatedly until the selected delayed start indicator light switches off. The wash program will start automatically as soon as the door is shut. The Delay function cannot be set once a wash cycle has been started. TURBO This option can be used to reduce the duration of the main programs while maintaining the same washing and drying performance levels. After selecting the program, press the TURBO button and the indicator light will switch on. To deselect the option, press the same button again. CHECK WATER CONNECTION Check that the dishwasher is connected to the water supply and that the top is open. SWITCH ON THE DISHWASHER Open the door and press the ON/OFF button. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE Select the most appropriate program in accordance with the type of crockery and its soiling level (see PROGRAMS DESCRIPTION) by pressing the P button. START Start the wash cycle by closing the door. When the program starts you hear a beep. END OF WASH CYCLE The end of the wash cycle is indicated by beeps and by the flashing of the wash cycle number on the display. Open the door and switch off the appliance by pressing the ON/OFF button. Wait for a few minutes before removing the crockery - to avoid burns. Unload the racks, beginning with the lower one. The machine will switch off automatically during certain extended periods of inactivity, in order to minimise electricity consumption. If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. MODIFYING A RUNNING PROGRAM If a wrong program was selected, it is possible to change it, provided that it has only just begun: open the door (be ware of HOT steam! [. . . ] € Nummeret for det valgte niveau og kontrollampen for afspændingsmiddel blinker begge to. € Nummeret for det valgte niveau og kontrollampen for salt blinker. Vælg den ønskede tilstand ved at tænde for maskinen, holde knappen P inde, til et af de tre bogstaver vises på displayet, trykke på knappen P, til det ønskede bogstav (eller tilstand) vises, og holde knappen P inde for at bekræfte valget. A RENGØRING AF VANDINDLØBSSLANGEN Hvis vandslangerne er nye eller ikke har været i brug i længere tid, skal du lade vandet løbe igennem for at sikre, at det er klart og fri for urenheder, før du foretager de nødvendige tilslutninger. [. . . ]