User manual WHIRLPOOL WOC54EC0AW INSTALLATION GUIDE

[. . . ] All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING. € These words mean: DANGER WARNING You can be killed or seriously injured if you don't immediately follow instructions. You can be killed or seriously injured if you don't follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. [. . . ] This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C). 6 A Electrical Connection To properly install your oven, you must determine the type of electrical connection you will be using and follow the instructions provided for it here. –  Oven must be connected to the proper electrical voltage, amperage, and frequency as specified on the model/serial number rating plate. 240 VAC 208 VAC 240 VAC 208 VAC For power requirements for models KEMS379B and KEMS309B, refer to the following table. Model/serial number plate ■ 208 VAC Models rated from 7. Connect directly to the fused disconnect (or circuit breaker box) through flexible, armored or nonmetallic sheathed, copper cable (with grounding wire). see “Make Electrical Connection” section. Flexible conduit from the oven should be connected directly to the junction box. For power requirements for model KEHU309B, refer to the following table. Decide on the final location for the oven. Locate existing wiring to avoid drilling into or severing wiring during installation. Where local codes do not allow grounding through neutral, New Branch circuit installations (1996 NEC), mobile homes and recreational vehicles, new construction and in Canada. Green (or bare) ground wire (from oven) F. Connect the 2 black wires (C) together using a UL listed wire connector. Connect the 2 white wires (D) and the green (or bare) ground wire (of the oven cable) using a UL listed wire connector. Connect the 2 red wires (G) together using a UL listed wire connector. uL listed or CSA approved conduit connector 1. Connect the 2 black wires (B) together using a UL listed wire connector. Connect the 2 red wires (C) together using a UL listed wire connector. Untwist white wire from green (or bare) ground wire coming from the oven. Connect the 2 white wires (F) together using a UL listed wire connector. Connect the green (or bare) ground wire (H) from the oven cable to the green (or bare) ground wire (in the junction box) using a UL listed wire connector. [. . . ] NOTE: If you have model KEMS308S, KEHU309S or KEMS378S, proceed to Step 5. Insert the grommet into the mounting rail hole using a flatblade screwdriver. Insert the screwdriver into the grommet and turn ¹⁄₄ turn counterclockwise. Make sure the grommet stays in position. [. . . ]