User manual WHIRLPOOL WOC54EC7AS INSTALLATION GUIDE

[. . . ] 16 BUILT-IN MICROWAVE/OVEN COMBINATION SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This symbol alerts you to potential hazards that can kill or hurt you and others. [. . . ] Failure to do so can result in back or other injury. To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front frame for lifting. Remove the shipping materials and tape from the oven. Remove the hardware package from inside the bag containing literature. Remove and set aside racks and other parts from inside the oven. Move oven and cardboard close to the oven’s final location. Failure to follow these instructions can result in death, fire, or electrical shock. IMPORTANT: For model KEHU309B, you must use 6 gauge copper or 4 gauge aluminum wire. Locate the oven door latches in both corners of the oven door, and rotate the latches forward to the unlocked position. Failure to follow these instructions can result in death, fire, or electrical shock. This oven is manufactured with a neutral (white) power supply wire and a cabinet-connected green (or bare) ground wire twisted together. Feed the flexible conduit from the oven through the opening in the cabinet. Grasp the edges of the oven door with both hands and close the oven door until it will no longer close. Lift and pull oven door toward you and remove. Set the oven door aside on a covered work surface. Route the flexible conduit from the oven to the junction box through a UL listed or CSA approved conduit connector. See “Electrical Connection Options Chart” to complete installation for your type of electrical connection. 5 Electrical Connection Options Chart If your home has: 4-wire Go to section: 4-wire Cable from Home Power Supply 3-Wire Cable from Home Power Supply - U. Only IMPORTANT: Use the 3-wire cable from home power supply where local codes permit a 3-wire connection. [. . . ] Replace oven door by inserting ends of hinges into hinge slots in the oven frame. Push hinges in as far as they will go and open the oven door. You should feel the oven door drop into place. Rotate both hinge latches back to the locked position. [. . . ]