User manual WHIRLPOOL WP 88/1 PRODUCT FICHE

[. . . ] Warning: when the door is opened steam comes out!Unload the appliance, starting from the lower rack. Switch off the appliance Turn off the water tap, unload the racks Dishwasher loading instructions and racks provided depending on the model Upper rack: Crockery holder (A): Depending on the position, for long-handles utensils, cups and plates. Carving forks, knives) must be arranged with the sharp end facing in towards the appliance. [. . . ] Place the cutlery basket (C), if provided, in the upper rack. Rack height adjustment (also when loaded): Pull the two rack handles (D) Lower adjustment: outwards and lower the rack. Pull the two rack handles (D) upwards until the rack clicks Upper adjustment: into place (factory setting). B A C D D Retainer open Retainer closed Removing the top rack to provide clearance for large items of crockery in the bottom rack: Open the rack guide retainers (E) on the right and left and remove the top rack. When the upper rack is in place the retainers must always be closed. E E Lower rack: Depending on the model with fixed, tilting (F) or tilting split plate holders (G). half Load: Load the lower rack (see description of Options). Greater washing power, particularly for plates and saucepans. F F H Power Clean load Increased wash power in the dedicated area (H) and high flexibility for lower rack loading. g Cutlery basket (I): Grid (J) to keep items separate. Sharp knives and forks that might cause injury must be placed in the cutlery basket with the sharp end facing downwards. GB On button Indicates in hours the time remaining until the start of the wash cycle. Switches off when the programme starts and indicates the time remaining in hours and minutes. € Identification of faults for service technician “Delayed start” button Start button Switches “on” when the dishwasher is operating. Switches off at the end of the programme. The wash cycle can be programmed to start after 1 - 24 hours. With each successive touch of the button, the delayed start indicator increases by 1 hour, and after 24 returns to 00. The dishwasher will start at the set time. €œHalf load - Multizone” button After pressing the Reset button, the selected programme and the supplementary functions are cancelled (except the detergent and water hardness settings, see user instructions) and must be reset. On releasing the button this is confirmed by an acoustic signal. Reset button Load the upper or lower rack only. This function can be used with any programme. [. . . ] This function can be used with any programme. Press once = upper rack (the indication lamp/symbol comes on) Press twice = lower rack (the indication lamp/symbol comes on) Press 3 times = Off (half load function deactivated). When washing without the top rack, press the “Half Load” button twice, or “Lower rack wash” (the corresponding LED/symbol comes on). Set detergent Indicators Add rinse aid Add regeneration salt Only add regeneration salt immediately before starting a wash programme. [. . . ]