User manual WHIRLPOOL WRS322FDAW USE & CARE GUIDE

[. . . ] U-Line also backs customers with a strong dealer network. U-Line's commitment to quality even extends to environmentally safe packaging. U-Line products are making life more convenient in homes, businesses, and hotels around the world. PLEASE READ all instructions completely before attempting to install or operate the unit. The icons 2075DWRR refrigerator unit, CO2075DWR refrigerator/ice maker combination and 2075DWRWC Wine Captain® drawer units are used throughout this manual to help you identify the specifics to your U-Line product. Once you have your unit installed, we suggest you keep this manual in a safe place for future reference. [. . . ] It consists of an LED display, two LED status indicator lights and three touch pad buttons. The LED display shows the refrigerator temperature set point and is calibrated in degrees Fahrenheit. The controller is factory programmed for a set point of 38°F for the top drawer which will show when the unit is first powered up. The factory set point for the ice compartment is 0°F. To display actual refrigerator temperature, press the "WARMER" button momentarily. A solid status indicator light (1, Figure 22) will show the air temperature reading in the cabinet for approximately 10 seconds. To adjust the temperature set point, press the "SET TEMP" button momentarily; the display will flash. Press the "WARMER" or "COOLER" button as desired to change the set point. When the desired set point shows on the display, you can press the "SET TEMP" again or wait 10 seconds and the new set point will be saved and the display will stop flashing. Wait 24 hours for the temperature to stabilize before checking the actual temperature again. The refrigerator set point range is 34°F to 45°F. 25 User's Manual NOTE The temperature will be the air temperature in the unit and NOT the temperature of your product. Touch twice ­ Top compartment light on, bottom compartment light off. Touch three times ­ Bottom compartment light on, top compartment light off. Touch four times ­ Both compartment lights off. To enter the "black-out mode, " touch and hold " " for approximately 15 seconds, this will turn off both display temperatures and the cabinet lights. The unit will continue to maintain the compartment set point temperatures even though they are not displayed. If the light symbol is touched and held for 10 seconds, the unit will come out of "black-out mode, " the set points will be displayed and the lighting function will be in one of the four scrolled positions. NOTE When the unit is in "black-out mode, " the light will come on automatically if the drawer is opened. If you do not want the lights to come on when the drawers are opened, the light bulbs must be removed. A flashing indicator light (LED dot) indicates a thermistor error in that drawer. Call for service. 28 DRAWERS The drawers should only be removed for servicing by a trained and certified repair person. BIN GUIDE TOP STORAGE BIN Grasp the bin handle and slide backward to access the contents below (Figure 25). The bin may be completely removed for cleaning once it clears the guides on each side of the drawer. If heavy items are stored in bin, push front of bin down slightly while sliding. [. . . ] Set temperature controller to colder setting. Allow 24 hours for temperature to stabilize. Soft sounds from the compressor and fan motor, and dropping sounds from the ice maker will be heard. Carefully bend tubing away from cabinet and components. [. . . ]