User manual WHIRLPOOL WRS950SIAM INSTALLATION GUIDE

[. . . ]  Open the freezer door and remove the ice storage bin.  Locate the ice maker switch on the left wall of the storage bin area. [. . . ] Make sure the base grille is properly attached to the refrigerator. œ”Adjusting the Temperature After installation, allow 24 hours for the refrigerator to reach the recommended temperature setting. Under some conditions, you may need to adjust the controls to a colder or warmer setting than is normally recommended. Make adjustments only one setting at a time, and wait 24 hours between adjustments. Leveling foot ✔ The doors are designed to be slightly different heights when the refrigerator is empty, in order to account for the weight of food that will be placed on the doors. If doors are uneven after food has been placed inside: ❏ Use a ⁵⁄₁₆" open-ended or adjustable wrench to turn s Turn the screw to the right to raise the refrigerator door, or turn it to the left to lower the door. The alignment screw, which is located on the bottom hinge of the refrigerator door. AIR FILTER INSTALLATION (on some models) ✔ Install Air Filter(s) and status indicator(s) according to instructions. œ”Ice and Water System (on some models) Connect the refrigerator to the household water supply, and turn it on. Make sure the water supply line behind the refrigerator is not kinked. [. . . ] Normal sounds may include cracking/crashing, popping, pulsating/whirring, rattling, water running or gurgling, and sizzling. œ”Accessories (on some models) Install Air Filter(s) and/or Produce Preserver(s) according to instructions. [. . . ]