User manual WHIRLPOOL WSC5513 A W INSTALLATION

[. . . ] • To cook on up to two different shelf levels. • If necessary, switch the positions of the dishes to cook food more evenly. • It is not necessary to preheat the oven (except for pizzas and focaccias). [. . . ] • • • • To cook meat (smoked bacon, steaks, sausages, etc. ) and for making toast. For best results, leave the oven door open when grilling. When cooking meat, to avoid spatters of fat and smoke, pour a little water into the drip tray. • To grill large joints of meat (roast beef and other roast meats). • The oven door must be kept closed during the cooking cycle. • When cooking meat, to avoid spatters of fat and smoke, pour a little water into the drip tray. • Ideal for thawing frozen food at room temperature. • The food should be placed in the oven in its wrapping to prevent it from drying out. Top shelf Bottom shelf PASTRY/FAN ACCESSORIES Enameled baking tray: Wire Shelf: Two levels sliding shelves: GRILL TURBO GRILL CONTROL PANEL DEFROSTING 1 2 3 4 5 6 7 8 1. Control knob for front left hotplate 0 1 . . . 10 *. Important: Before selecting this function, make sure the pot is positioned on the selected hotplate in order to avoid any damage to the cooktop surface. The stated performance values for this function are those guaranteed for all glass ceramic cooktops. For this function, place the pot on the selected hotplate and turn the knob to . To deselect, change the position of the knob. The multizone symbol, featured on the knobs, can only be switched on for those hotplates of the cooktop equipped with double or triple zone function. These functions extend the heating area of the cooktop in order to allow the use of large, oval or rectangular pots or cooking receptacles. To switch on the dual zone (if available), turn the knob to and wait until the residual heat indicator for the hotplate begins to flash. To switch on the triple zone function (if available), wait until the LED begins flashing quickly. Select the power setting required by turning the knob anti-clockwise. [. . . ] To switch on the triple zone function (if available), wait until the LED begins flashing quickly. Select the power setting required by turning the knob anti-clockwise. The residual heat indicator remains on to indicate that the cooktop is in use. [. . . ]