User manual WHIRLPOOL WSS30 W INSTALLATION

[. . . ] GB For correct and safe installation of the appliance, please carefully read this manual and the other documentation provided (see section "Precautions and general advice"). Specifications, technical data, images and parts supplied may be subject to change without prior notice. [. . . ] Electrical safety of the appliance can only be guaranteed if it is correctly connected to an efficient, approved earthing system. MOUNTING FREEZER DOOR Important: If your appliance has two water fill pipes (see figure), when mounting the door you must reconnect the two pipes to the matching ones at the bottom of the appliance, being careful to connect like colours with like: - white-white: water - blue-blue: ice. POSITIONING AND LEVELLING YOUR REFRIGERATOR If the appliance seems unsteady or you want the doors to close more easily, adjust the appliance's tilt following the instructions below (depending on the model, as shown in the figures on the right). The refrigerator has two front and two rear wheels at the base of the product on each side and two adjustable feet at the front A (see figure A). Check the installation location to be sure you have at least 1 cm clearance on all sides including the top. Connect the appliance to the mains power supply. Move the refrigerator into its final position. Open both doors and remove the plinth to locate the feet and levelling bolts at the left and right of the refrigerator base (where present). The top bolt (1) will adjust the rear wheel (if provided), and the bottom bolt (2) will adjust the B front wheel (see figure B). [. . . ] - Clear up any spills on the floor. 5 [. . . ]