User manual WHIRLPOOL WVA35642 NFW PROGRAMMA OVERZICHT

[. . . ] Auf 0°C ansteigt ; der Alarm-Signalton hört auf, die Temperaturanzeige leuchtet dauerhaft, bis eine Temperatur < -10 °C Funktionsstörung Der Buchstabe "F" blinkt am Display (°C) Gerätestörung 5019 620 00011/A D GB F NL E P I GR S N DK FIN PL CZ SK H RUS BG RO UKR CA 5019 620 00011/A QUICK START GUIDE Read the Instructions for Use carefully before using the appliance. POWER ON (EXTERNAL LED) indicator An external green LED showing that the appliance is switched ON. [. . . ] ALARM indicator (see the below Alarms Table) ECO NIGHT (NIGHT TIME RATE) button Press to activate/deactivate the Eco Night function. The Eco Night function enables appliance energy consumption to be concentrated in the reduced rate hours, generally at night (see the Instructions for Use). sTOP ALARM button Press in case of alarm. TEMPERATURE/FAST FREEZE button Temperature Setting The appliance is normally factory-set for operation at the recommended temperature of -18°C. The internal temperature can be adjusted between -16°C and - 24°C, proceeding as follows: • Press the temperature setting button (°C). The storage temperature can be changed by -1°C with each pressure of the button: the value changes cyclically between -16°C and -24°C. Fast Freeze • Press for 3 seconds to activate the Fast Freeze function (see the Instructions for Use)The function switches off automatically after about 50 hours. aLARMS TABLE Door open alarm Signal The acoustical alarm is activated and the Alarm Indicator blinks. Cause The door has remained open for more than 2 minutes. Press the Stop Alarm button blinks and the Alarm Indicator ; the acoustical alarm stops, the Temperature Display (°C) remains on until a temperature < -10°C is reached. temperature alarm The Temperature display blinks (°C) and the Alarm Indicator remains on. The Black Out Alarm icon remains on, the Alarm indicator blinks and the Prolonged power failure, able to cause the inside temperature to increase to 0°C. [. . . ] Kontakt Service Temperaturalarm Temperaturdisplayet blinker (°C), og indikatoren for alarm forbliver tændt Den indvendige temperatur er ikke passende Alarm for længerevarende strømafbrydelse Ikonet for alarm for strømafbrydelse forbliver tændt, indikatoren for Længerevarende strømafbrydelse, der kan medføre, at alarm blinker, og temperaturdisplayet (°C) blinker og viser den den indvendige temperatur stiger til 0 °C højeste temperatur, der forekom under strømafbrydelsen. Apăsaţi butonul din nou pentru a reactiva aparatul BUTONUL BLOCARE TASTE Pentru a bloca/debloca tastele de pe panoul de comandă, apăsaţi butonul Blocare taste timp de 3 secunde: indicatorul Blocare taste a fi afişat o perioadă scurtă de timp şi se va auzi un semnal sonor. [. . . ]