User manual WHIRLPOOL WVE1862 A NFX PRODUCT FICHE

[. . . ] Wait at least two hours before switching the appliance on in order to ensure the refrigerant circuit is fully efficient. Installation of the appliance and electrical connections must be carried out by a qualified electrician, in accordance with the manufacturer’s instructions and local safety regulations 4. Clean the inside of the appliance before using it. Keep the packaging materials (plastic bags, polystyrene parts, etc. [. . . ] €¢ It must be possible to disconnect the appliance from the mains by unplugging it or by means of a two-pole switch fitted upline of the socket. €¢ Ensure that the voltage indicated on the appliance data plate corresponds to the domestic supply voltage • Do not swallow the contents (non-toxic) of the ice packs (if provided). €¢ The Manufacturer declines any liability if the above recommendations and precautions are not respected. Fm Page 16 Tuesday, March 27, 2007 10:22 AM HOW TO USE THE FREEZER The freezer can be used for storing already frozen food and for freezing fresh food. Switching on the freezer for the first time • There is no need to set the freezer temperature on the thermostat because the appliance is already factory set. €¢ The alarm signal activates, indicating that the freezer has not yet reached a sufficiently cold temperature for storage of foodstuffs. €¢ Only place food in the freezer once the alarm signal has deactivated (for further details, see the enclosed product sheet). temperature Adjustment For temperature adjustment , see the enclosed product sheet. Note: Ambient air temperature, the frequency of door opening and the position of the appliance can affect the freezer internal temperature. Take these factors into consideration when setting the thermostat knobs. €6th Sense” function The 6th Sense function, if present, is automatically activated in the following cases: Door opening The function activates when door opening causes the internal temperature to increase to a level that fails to guarantee safe storage of food; it remains active until optimal storage conditions have been restored. MONTHS FOOD Advice for storing frozen food When purchasing frozen food products: • Ensure that the packaging is not damaged (frozen food in damaged packaging may have deteriorated). If the package is swollen or has damp patches, it may not have been stored under optimal conditions and defrosting may have already begun. €¢ When shopping, leave frozen food purchases until last and transport the products in a thermally insulated cool bag. €¢ Once at home, place the frozen foods immediately in the freezer. €¢ If food has defrosted even partially, do not re-freeze it. Respect the best-before date on the package. €¢ Always observe the storage information on the package. Fm Page 18 Tuesday, March 27, 2007 10:22 AM Removing the baskets • Pull the baskets out fully, then lift them up slightly in order to remove. Drawers (except the bottom drawer), runners and the white grid (if provided) may be removed in order to obtain increased storage space (Fig. 1) Ensure that the load does not exceed the limit (if present) indicated on the side walls of the appliance. 1 Compartment Use this compartment only for making ice cubes and storing ice packs, as shown in Fig. [. . . ] €¢ Plug in the appliance once again. Note: for electronic models, first insert the power plug into the mains socket and then press the on/off button to switch on the appliance. For the correct defrosting procedure, refer to the PRODUCT DESCRIPTION SHEET. CARE AND MAINTENANCE Before any cleaning or maintenance operation, unplug the appliance from the mains or disconnect the electrical power supply. [. . . ]