User manual WHIRLPOOL WVT503 PRODUCT FICHE

[. . . ] The corresponding indicator lamp lights up. The corresponding indicator lamp lights up. €œChange programme in progress” Select additional options Press the Start button The selected programme is then memorised (even in the event of power failure). until the Start indicator lamp switches off. [. . . ] Wash cycle - Only open the dishwasher if necessary (Warning: beware of hot steam). - If the appliance is switched off during a wash cycle, when switched on again it will resume the cycle from where it was interrupted. Only after the START button has switched off: Press the ON / OFF button. Warning: When the door is opened steam comes out!Unload the appliance, starting from the lower rack. Switch off the appliance Turn off the water tap, unload the racks Dishwasher loading instructions and racks provided Upper rack: Multi-purpose support (A): 1) Depending on the position, for longhandles utensils, cups and glasses. May be used in three different positions. Crockery holders (B): Depending on the position, for example plates, cups and long-stemmed glasses. Revolving glass support (C): 2) Depending on the position, for example small or long-stemmed glasses. Carving forks, knives) must be arranged with the sharp end facing in towards the appliance. €¢ Arrange crockery so that items do not touch each other. €¢ Select a more intense wash cycle. €¢ The spray arms must be able to turn freely. €¢ Remove any impurities obstructing the water flow *. If crockery is not perfectly clean • The water jet does not reach the crockery. €¢ Depending on the material, if necessary use a detergent with a greater whitening power. Opaque glasses/ glasses • Cannot be washed in the dishwasher. Not sparkling Rust on cutlery Identifying appliance faults • Not made of stainless steel. €¢ Ensure the filter assembly is not clogged and that there is no interruption to the water supply (if necessary, clean the filters *). Press the START button for 2 seconds, until the START indicator lamp switches off. [. . . ] Select a new programme and press the Start button again. If after carrying out the above checks the malfunction persists or appears again, turn the appliance off and turn off the water supply tap, then call our After-Sales Service (see guarantee). Before contacting our After-Sales Service, take note of the following: • The nature of the fault • The appliance type and model • The service code (the number indicated on the adhesive rating plate) inside the door on the right-hand side. Before using the dishwasher, read the user instructions! [. . . ]