User manual WHIRLPOOL WZF34X18DW USE & CARE GUIDE

[. . . ] We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING. [. . . ] The front rollers will be touching the floor. To Adjust the Cabinet Tilt: NOTE: Having someone push against the top of the freezer takes some weight off the brake feet. ■ Open the freezer door. Use a ¹⁄₄" hex driver to turn both brake feet clockwise the same amount. This will raise the front of the freezer. It may take several turns to allow the door to close more easily. â¹â„â‚„" 2. Lower the brake feet, by turning them clockwise, until the rollers are off the floor and both brake feet are snug against the floor. –  Allow the freezer to cool 6 to 8 hours before filling with frozen food. 7 ■ When the freezer is first started, the compressor will run constantly until the freezer is cooled. It may take up to 6 or 8 hours (or longer), depending on room temperature and number of times the freezer door is opened. As ice is made, the ice cubes fill the ice storage bin and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position. To manually turn the ice maker off, lift the wire shutoff arm to the OFF (arm up) position and listen for the click to make sure the ice maker will not continue to operate. Fast Freeze Use this feature before adding large amounts of unfrozen food. For the best food quality, do not exceed 3 lbs (1, 361 g) per cu. To activate Fast Freeze, press the TEMP SETTING button until all the snowflake positions are illuminated simultaneously. The freezer will remain in the Fast Freeze setting for 24 hours after the extra-low temperature is reached. Once the time has expired, the freezer will return to the previous temperature setting. Fast Freeze may be manually turned off by pressing the TEMP SETTING button to select the desired temperature setting from the snowflake on the left (least cold) to the snowflake on the right (coldest). –  Over Temperature Alert (on some models) The Over Temperature Alert lets you know if the freezer temperature has risen to 19°F (-7°C) or higher. This alert feature will sound a continuous alert tone and repeatedly flash a red light on the control panel. The tone can be turned off by pressing the TEMP SETTING button on the control panel once. [. . . ] Please take a few minutes to review the Troubleshooting or Problem Solver section of the Use and Care Guide, scan the QR code on the right to access additional resources, or visit www. And Canada, direct all requests for warranty service to: Whirlpool Customer eXperience Center In the U. If outside the 50 United States or Canada, contact your authorized Whirlpool dealer to determine whether another warranty applies. Com/product_help ONE YEAR LIMITED WARRANTY WHAT IS COVERED For one year from the date of purchase, when this major appliance is installed, operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Specified Replacement Parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased, or at its sole discretion replace the product. [. . . ]